Labels Milestones
BackAs seen at https://www.thingiverse.com/thing:3475324 * @todo Add support for melt-in nuts that can be used as SPST) 2 momentary pushbutton switches 1 rotary switch with ground pin http://www.ckswitches.com/media/1479/kmr2.pdf tactile push button, 6x6mm e.g. PHAP33xx series, height=8mm tactile push button, 6x6mm e.g. PHAP33xx series, height=4.3mm tactile push button, 6x6mm e.g. PHAP33xx series, height=4.3mm tactile push button, 6x6mm e.g. PHAP33xx series, height=5mm tactile push button, 6x6mm e.g. PHAP33xx series, height=7.3mm tactile push button, 6x6mm e.g. PHAP33xx series, height=5mm tactile push button, 6x6mm e.g. PHAP33xx series, height=5mm tactile push button, 6x6mm e.g. PHAP33xx series, height=9.5mm tact sw push 6mm smd CK components KMR2 tactile switch SPST right angle, http://spec_sheets.e-switch.com/specs/P040170.pdf Switch, single pole normally-open tactile switch 6mm ALPS SKHH right angle SPDT push button (https://www.alps.com/prod/info/E/PDF/Tact/SurfaceMount/SKRT/SKRT.pdf push horizontal SPST 1P1T tactile switch with 6 positions D Switch, single pole triple throw, 3 position switch, SP3T K switch dp3t ON-ON-ON D Switch, triple pole double throw, separate symbols K switch dual-pole double-throw DPDT spdt ON-ON illuminated red green D Push button switch, generic, separate symbols, four pins D Push button switch with 6 positions D 3 pin Molex header 2.54 mm 2x5