synth_tools

Back

2.0mm, orientation marker at anode, https://media.digikey.com/pdf/Data%20Sheets/CREE%20Power/CLM3A-BKW,GKW.pdf LED, SMD, PLCC-2, 3.0 x 2.0mm, orientation marker at anode, https://media.digikey.com/pdf/Data%20Sheets/CREE%20Power/CLM3A-BKW,GKW.pdf LED, SMD, APDA3020VBC/D, https://www.kingbrightusa.com/images/catalog/SPEC/APDA3020VBC-D.pdf SMD Top view Dual colour LED PLCC-2 SMD package, http://www.infineon.com/cms/en/product/packages/PG-TO263/PG-TO263-7-1/ D2PAK DDPAK TO-263 D2PAK-5 TO-263-5 SOT-426 TO-263 / D2PAK / DDPAK SMD package, http://www.infineon.com/cms/en/product/packages/PG-TO263/PG-TO263-3-1/ TO-263/D2PAK/DDPAK SMD package, http://www.infineon.com/cms/en/product/packages/PG-TO252/PG-TO252-3-1/ TO-252/DPAK SMD package, http://www.onsemi.com/pub/Collateral/ENA2192-D.PDF Analog Devices (Linear Tech), 133-pin BGA uModule, 15.0x15.0x4.92mm, https://www.analog.com/media/en/technical-documentation/data-sheets/4637fc.pdf MAPBGA 9x9x1.11 PKG, 9.0x9.0mm, 272 Ball, 17x17 Layout, 0.8mm Pitch, https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-bga/05081600_0_bga49.pdf https://www.analog.com/media/en/technical-documentation/product-information/assembly-considerations-for-umodule-bga-lga-package.pdf BGA 324 0.8 CS324 CSG324 BGA 324 0.8 GateMate FPGA Maxim WLP-12, W121H2+1, 2.008x1.608mm, 12 Ball, 4x3 Layout, 0.4mm Pitch, https://www.st.com/resource/en/datasheet/stm32wb15cc.pdf#page=119 ST WLCSP-52, ST die ID 480, 4.57x4.37mm, 132 Ball, 12x11 Layout, 0.35mm Pitch, https://www.st.com/resource/en/datasheet/stm32h725vg.pdf ST WLCSP-115, ST die ID 494, 3.3x3.38mm, 49 Ball, 7x7 Layout, 0.4mm Pitch, https://www.st.com/resource/en/datasheet/stm32g031y8.pdf ST WLCSP-20, ST die ID 482, 4.2x3.95mm, 90 Ball, X-staggered 13x8 Layout, 0.4mm Pitch, https://www.st.com/resource/en/datasheet/stm32g051f8.pdf#page=102 ST WLCSP-25, ST die ID 471, 4.437x4.456mm, 100 Ball, 10x10 Layout, 0.4mm Pitch, https://www.st.com/resource/en/datasheet/stm32g431c6.pdf ST WLCSP-49, off-center ball grid, ST die ID 469, 4.02x4.27mm, 81 Ball, 9x9 Layout, 0.4mm Pitch, https://www.st.com/resource/en/datasheet/stm32l4p5ve.pdf ST WLCSP-115, ST die ID 471, 4.437x4.456mm, 100 Ball, 10x10 Layout, 0.4mm Pitch, https://www.st.com/resource/en/datasheet/stm32g0b1ne.pdf#page=136 ST WLCSP-64, ST die ID 495, 4.4x4.38mm, 100 Ball, 10x10 Layout, 0.4mm Pitch, https://www.st.com/resource/en/datasheet/stm32g483me.pdf ST WLCSP-81, ST die ID 495, 4.4x4.38mm, 100 Ball, 10x10 Layout, 0.4mm Pitch, http://www.st.com/content/ccc/resource/technical/document/technical_note/92/30/3c/a1/4c/bb/43/6f/DM00103228.pdf/files/DM00103228.pdf/jcr:content/translations/en.DM00103228.pdf pSemi CSP-16 1.64x2.04x0.285mm (http://www.psemi.com/pdf/datasheets/pe29101ds.pdf, http://www.psemi.com/pdf/app_notes/an77.pdf UFD Package, 4-Lead Plastic QFN (4mm x 4mm); Pitch 0.5mm; EP 2.7x2.6mm; for InvenSense motion sensors; Mask removed below exposed pad; keepout area marked (Package see: https://store.invensense.com/datasheets/invensense/MPU9250REV1.0.pdf; See also https://www.invensense.com/wp-content/uploads/2015/02/InvenSense-MEMS-Handling.pdf 24-Lead Plastic QFN (4mm x 4mm); Pitch 0.5mm; EP 2.7x2.6mm; for InvenSense motion sensors; Mask removed below exposed pad; keepout area marked (Package see: https://store.invensense.com/datasheets/invensense/MPU9250REV1.0.pdf; See also https://www.invensense.com/wp-content/uploads/2015/02/InvenSense-MEMS-Handling.pdf 24-Lead Plastic Shrink Small Outline (SM) - 5.28 mm Body with Exposed Pad (see Microchip datasheet http://ww1.microchip.com/downloads/en/DeviceDoc/mic5355_6.pdf MLF, 20 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/atmel-8235-8-bit-avr-microcontroller-attiny20_datasheet.pdf#page=212), generated with kicad-footprint-generator Molex Mini-Fit Jr. Power Connectors, 105309-xx06, 6 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 4 times 0.1 mm² wires, basic insulation, conductor diameter 1.25mm, outer diameter 3mm, see http://www.metz-connect.com/de/system/files/METZ_CONNECT_U_Contact_Katalog_Anschlusssysteme_fuer_Leiterplatten_DE_31_07_2017_OFF_024803.pdf?language=en page 133, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon THT Terminal Block 4Ucon ItemNo. 19965 pitch 3.5mm size 28.7x7mm^2 drill 1.2mm pad 3mm single screw terminal block Metz Connect.

New Pull Request

Labels Milestones