Labels Milestones
Back11310848 bytes Synth_Manuals/Module Summaries.ods Normal file View File Schematics/shaek_try_1.diy Normal file Unescape Hardware/PCB/precadsr/ao_tht.pretty/PPTC_RXEF025.kicad_mod Normal file View File Schematics/Unseen Servant/fp-info-cache | 1 | B10k | Potentiometer | | 1 | SW_Push | Push button switch, normally closed, generic, four pins D Momentary Switch, single pole normally-open tactile switch SPST right angle, PTS645VL83-2 LFS C&K Button SW PUSH 12mm https://www.e-switch.com/system/asset/product_line/data_sheet/143/TL1100.pdf tact sw push 6mm smd CK components KMR2 tactile switch 6mm ALPS SKHH right angle Surface-mount DC Barrel Jack 2mm or 2.5mm center pin, https://www.kycon.com/Pub_Eng_Draw/KLDX-0202-AC%20&%20BC.pdf power jack - Confirm barrel power jack Consider incorporating additional LED indicators for use as tremolo Manual offset knob 63579cf959 Add notes about UX component wiring 55ee65a5e9 Checkpoint after fixes but before shrinking boards Checkpoint after tweaking footprints some more, starting over at 14hp cd18ed43dc Added hard sync to schematic, laid out PCB with 2 copper strip, labeled with numbers SMD Solder 3-pad Jumper, 1x1.5mm Triangular Pads, 0.3mm gap, open SMD Solder 3-pad Jumper, 1x1.5mm Pads, 0.3mm gap, open, labeled with numbers SMD Solder Jumper, 1x1.5mm Triangular Pads, 0.3mm gap, pads 1-2 Bridged2Bar with 2 pins, pitch 2.54mm, size 23.3x6.2mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00276_DB_EN.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix PT-1,5-7-5.0-H, 7 pins, pitch 5mm, size 15x12.6mm^2, drill diamater 1.3mm, pad diameter 2.4mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT.
- Angle right angle tht.
- Normal -3.370546e-001 -5.903163e-001 7.334309e-001 vertex -4.555076e-003.
- 4.9mm, pitch 10mm Varistor.