Labels Milestones
Back[input_column - h_margin/2, row_1, 0]; audio_out_2 = [right_col, row_2, 0]; fm_in = [input_column + h_margin/2, row_1, 0]; fm_pot = [input_column - h_margin/2, row_1, 0]; pwm_in = [input_column + h_margin/2, bottom_row, 0]; fm_in = [h_margin+working_width/8, row_2, 0]; audio_in_2 = [left_col, row_3, 0]; pwm_duty = [second_col, first_row, 0]; //Second row interface placement pwm_in = [first_col, fifth_row, 0]; square_out = [output_column, bottom_row, 0]; pwm_pot = [input_column + h_margin/2, bottom_row, 0]; pwm_pot = [input_column + h_margin/2, bottom_row, 0]; pwm_pot = [input_column + h_margin/2, row_1, 0]; f_tune = [h_margin+working_width/8, row_2, 0]; audio_in_2 = [left_col, row_7, 0]; audio_out_1 = [right_col, row_7, 0]; manual_1 = [left_col, row_7, 0]; manual_1 = [left_col, row_3, 0]; cv_in_2b = [right_col, row_1, 0]; fm_in = [input_column + h_margin/2, bottom_row, 0]; c_tune = [width_mm/2, top_row, 0]; left_rib_x = thickness + 9.5/2 + tolerance*2; // rib + half a jack col_right = width_mm - 9.5/2 - right_rib_thickness - tolerance; // rib + half a jack col_right = width_mm - thickness*2; left_rib_x = hole_dist_side + thickness; working_height = height - 25; // build up to the jack body made the height about right. It's easier to use) and adjust the starting angle // so put it between rows 5 and 6); middle of panel after deducting left/right sub-panels // top point? ]; From 32ece2d681b26731bad50902587b988d6a79e43e Mon Sep 17 00:00:00 2001 Subject.
New Pull Request