Labels Milestones
BackAntenna astrocast Patch Antenna SMD antenna 2400-2500Mhz, 3.7dBi, https://www.molex.com/content/dam/molex/molex-dot-com/products/automated/en-us/productspecificationpdf/479/47948/PS-47948-001-001.pdf?inline Johanson 0900FM15K0039 DFN, 10 Pin (http://www.ti.com/lit/gpn/tps63030#page=24), generated with kicad-footprint-generator ipc_noLead_generator.py 10-Lead Plastic DFN (5mm x 3mm) (http://pdfserv.maximintegrated.com/land_patterns/90-0063.PDF 14-lead very thin plastic quad flat, 3.0x4.5mm size, 0.65mm pitch (http://ww1.microchip.com/downloads/en/DeviceDoc/14L_VDFN_4_5x3_0mm_JHA_C041198A.pdf DE Package; 14-Lead Plastic DFN (3mm x 3mm); Pitch 0.4mm; EP 1.7x1.54mm; for InvenSense motion sensors; Mask removed below exposed pad; keepout area marked (Package see: https://store.invensense.com/datasheets/invensense/MPU-6050_DataSheet_V3%204.pdf; See also https://www.invensense.com/wp-content/uploads/2015/02/InvenSense-MEMS-Handling.pdf 24-Lead Plastic QFN (4mm x 3mm) (see Linear Technology DFN_8_05-08-1702.pdf 8-Lead Plastic Dual Flat No Lead Package (MA) - 2x2x0.9 mm Body [QFN] with corner pads; see figure 8.2 of https://www.silabs.com/documents/public/data-sheets/efm8bb1-datasheet.pdf TDFN, 6 Pin (http://www.nve.com/Downloads/ab3.pdf), generated with kicad-footprint-generator Resistor SMD 01005 (0402 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://www.vishay.com/docs/20019/rcwe.pdf), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 4 times 2 mm² wires, reinforced insulation, conductor diameter 0.65mm, outer diameter 3.6mm, size source Multi-Contact FLEXI-E 1.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Molex LY 20 series connector, B18B-PUDSS (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator JST PUD series connector, S06B-XASK-1N-BN (http://www.jst-mfg.com/product/pdf/eng/eXA1.pdf), generated with kicad-footprint-generator Samtec HLE .100.