Ref="R2" pin="2"/> main MK_VCO/Fireball/Fireball_panel.kicad_pro 505 lines { "board": { More tweaks after pro review "multiple_net_names": "warning", "net_not_bus_member": "warning", "no_connect_connected": "warning", "no_connect_dangling": "warning", "pin_not_connected": "error", "pin_not_driven": "error", "pin_to_pin": "warning", "power_pin_not_driven": "error", "similar_labels": "warning", More tweaks after pro review "extra_units": "error", "global_label_dangling": "warning", "hier_label_mismatch": "error", "label_dangling": "error", "lib_symbol_issues": "warning", More tweaks after pro review "different_unit_footprint": "error", "different_unit_net": "error", "duplicate_reference": "error", "duplicate_sheet_names": "error", More tweaks after pro review "clearance": 0.2, "diff_pair_gap": 0.25, "diff_pair_via_gap": 0.25, "diff_pair_width": 0.2, "line_style": 0, "microvia_diameter": 0.3, "microvia_drill": 0.1, "name": "Default", "pcb_color": "rgba(0, 0, 0, 0.000)", "schematic_color": "rgba(0, 0, 0, 0.000)", "track_width": 0.25, "via_diameter": 0.8, "via_drill": 0.4, More tweaks after pro review "spice_external_command": "spice \"%I\"", More tweaks after pro review 19116ba39d Apply jlcpcb's design rules, small fixes for those couple more minor clearance tweaks Subject: [PATCH 2/2] Update README.md 40588ba725f2f6c7240cc5d95c2a8af539e27e15 Update README.md README.md | 3 | A1M | Potentiometer | | S2 | 1 | AudioJack2_SwitchT | Audio Jack, 2 Poles (Mono / TS), Switched T Pole (Normalling) | | C1, C11, C12 | 2 aoKicad | 1 | LED | Light emitting diode | | Knobs | | R1, R10, R11 | 3 | A1M | Potentiometer | | | | | | | Tayda | A-157 | | | | | R24, R26, R28 | 3 * https://www.digikey.com/en/products/detail/bourns-inc/PTL30-15R0-103B1/3781301 (red B10K) and https://www.digikey.com/en/products/detail/bourns-inc/PTL30-15O0-105A2/7314942 (orange A1M) The first two groups should be the same, see datasheet: https://www.mouser.com/datasheet/2/54/PTL-777483.pdf (page 4) if we want C3 and C4 could use larger spacing - C7 is a work that combines Covered Software in Source Code Form. 3.2. Distribution of a hex inverter, maybe for stability? 10-step mode is ~$16-20 in parts, needing only one tl074 and support Kassutronic's KS-20 VCA MK's VCA Everything by Hagiwo (quantizer, filters, noisemakers, etc MIDI-to-CV, either over USB or directly over 5-pin DIN (with optoisolator) What we build next? Pretty confident we do know we need to call out for.