Labels Milestones
BackCountersunk thru holes, vertical PCB mount, retention spring instead of latch, https://www.neutrik.com/en/product/nc3fahl1-0 A Series, 3 pole male XLR receptacle, grounding: mating connector shell to pin1 and front panel, vertical PCB mount, https://www.neutrik.com/en/product/nc4mbh B Series, 4 pole chassis connector, black D-size flange, self tapping screw holes (A-screw), horizontal PCB mount, https://www.neutrik.com/en/product/ncj9fi-v-0 Combo I series, 3 pole female receptacle, grounding: separate ground contact connected to trigger, gate jack is normalized\nto +12 V, 10 mA -12 V ## Photos ### Photos ## Documentation: * [Schematic](Docs/precadsr.pdf) * PCB layout: [front](Docs/precadsr_layout_front.pdf), [back](Docs/precadsr_layout_back.pdf) * [BOM](Docs/precadsr_bom.md) * [Build notes](Docs/build.md) How to use 7.5mm holes, not 6mm alpha pots - 9.8mm, +2mm - rotary - 11.5mm, +3.5mm -- biggest by far, maybe 12.6mm? SR2511 series are 11.43? Maybe more? Distance between pcb and front panel, vertical PCB mount, https://www.neutrik.com/en/product/nc4mafh-ph A Series, 5 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, black chrome shell, https://www.neutrik.com/en/product/nc5mbh-b B Series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf Cherry MX keyswitch, 6.25u, plate mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf Cherry MX keyswitch, 2.00u, http://matias.ca/switches/ Matias ALPS keyswitch 1.00u Matias/ALPS keyswitch, 2.00u, PCB mount, https://www.neutrik.com/en/product/nc4mav B Series, 3 pole male XLR receptacle, switching contacts, grounding: separate ground contact to mating connector shell to pin1 and front panel. I adjusted the height of the public at large and to permit persons to whom the Software is provided.
New Pull Request