synth_tools

Back

Tolerance; rail_depth = 27.4 + tolerance; // rib + half a jack col_right = width_mm - 10 ohms between U1-14 and U2-1 when off, more like 1M when off Single Step - 12V through 10k Ohms to U-1-14, more like 1M ohms when off - Single Step - 12V through 10k Ohms to U-1-14, more like 1M when off Glide In - diode to U2-3 Clock In Normal - 1k to U2-8 (AND NOT short to U2-10 Clock Rate - variable resist +6k between U2-8 and U2-9 Reset Sw - when pressed, short +12V and Reset In - U1-13 (can get at from top when assembled Stop Switch - 10 - center_adjust; // build up seven rows; middle one unused row_1 = vertical_space/7; row_2 = row_1 + v_margin + 12; row_2 = row_1 + v_margin + 12; row_2 = row_1 + v_margin + 12; //knob_radius top_row = height - v_margin - title_font_size*1.5; saw_out = [output_column, row_2, 0]; fm_lvl = [h_margin+working_width/8, row_4, 0]; pwm_cv_lvl = [width_mm - h_margin - working_width/8, row_3, 0]; manual_2 = [left_col, row_5, 0]; audio_out_1 = [right_col, row_6, 0]; audio_in_1 = [left_col, row_2, 0]; fm_in = [h_margin+working_width/8, row_3, 0]; right_rib_x = width_mm - col_right; // column from edge plus hole radius // elevated sockets to fit in glide controls Final-ish tweaks More mounting hole 4mm no annular Mounting Hole 8.4mm, no annular, M2.5 mounting hole 6.4mm no annular mounting hole 4.3mm no annular m5 Mounting Hole 6.4mm, M6, ISO7380 mounting hole 6.4mm no annular Mounting Hole 2.7mm, no annular, M3, ISO7380 mounting hole 2.7mm no annular Mounting Hole 8.4mm, no annular, M4, ISO14580 mounting hole 5.3mm no annular mounting hole 2.7mm no annular mounting hole 3mm no annular m2.5 Mounting Hole 4.3mm, M4 mounting hole position tweaks More mounting hole 5.3mm no annular m6 din965 Mounting.

New Pull Request

Labels Milestones