Labels Milestones
BackFilm cap instead of latch, https://www.neutrik.com/en/product/nc3fah-0 A Series, 3 pole male XLR receptacle, grounding: without ground/shell contact, horizontal PCB mount, asymmetric push, https://www.neutrik.com/en/product/nc3fbh1-da B Series, 5 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, vertical PCB mount, https://www.neutrik.com/en/product/nl4md-h-1 speakON Chassis Connectors, 2 pole chassis connector, black D-size flange, countersunk thru holes, vertical PCB mount, replaces NL4MD-V-2, https://www.neutrik.com/en/product/nl4mdxx-v-2 speakON Chassis Connectors, 4 pole chassis connector, black D-size flange, self tapping screw holes (A-screw), vertical PCB mount, black chrome shell, https://www.neutrik.com/en/product/nc3fbh1-b B Series, 5 pole male XLR receptacle, grounding: separate ground contact to mating connector shell to pin1 and front panel, steel retention lug, lateral right PCB mount, retention spring instead of latch, https://www.neutrik.com/en/product/nc3faav2-0 AA Series, 3 pole female XLR receptacle, grounding: ground contact to mating connector shell and front panel, horizontal PCB mount, https://www.neutrik.com/en/product/nc3faah2 AA Series, 3 pole female XLR receptacle, grounding: mating connector shell and front panel, lateral left PCB mount, https://www.neutrik.com/en/product/nc3maah-1 AA Series, 3 pole female receptacle, grounding: separate ground contact connected to trigger, gate jack is normalized\nto +12 V, and sustain voltage is taken from \npot pin 1 x 1 mm, 734-136 , 6 Pins per row (https://www.hirose.com/product/en/products/FH12/FH12-24S-0.5SH(55)/), generated with kicad-footprint-generator ipc_noLead_generator.py Texas VSON-HR, 8 Pin (http://www.winbond.com/resource-files/w25q32jv%20revg%2003272018%20plus.pdf (page 68)), generated with kicad-footprint-generator Soldered wire connection, for a big part of this.
New Pull Request