Labels Milestones
BackPart="Synth_power_2x5" description="Pin header 2.54 mm spacing Pin header 2.54 mm spacing | Tayda | A-2939 | | | R14 | 1 Hardware/lib/aoKicad | 1 Consider replacing transistor through-holes with sockets or with modifications This won't be easy; need both A1M (x3) and B10K (x1) sliders in the post that we want to adjust CV output range, switch between 5v and 2.5v max (or whatever is configured). Momentary-normal-off pushbutton to manually reset. LEDs: One per step, to enable/disable gate per the Eurorack standard Outputs saw, triangle, and square waves, with CV in complex ways. - CV Out - 1K to TP5 - Gate out (could normal to TP10, optional 2x Toggle Switches, 3pin: 11 Toggle Switches, 2pin: all step switches (all go to same bus) - run/stop 2x Pushbutton switches, all 2pin: - all step switches (all go to same bus) - run/stop 2x Pushbutton switches, all 2pin: reset Pots, 3-pin: - Glide attenuator (B10k) (join two left pins from below Clock rate (B100k) (not sure yet which 2 pins LED_Rectangular, Rectangular, Rectangular size 5.0x2.0mm^2 z-position of LED center 1.6mm 2 pins LED, Round, FlatTop, diameter 5.0mm, 2 pins, pitch 10mm, size 35x10.3mm^2, drill diamater 1.2mm, pad diameter 2mm, size source Multi-Contact FLEXI-xV 0.75 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator ipc_gullwing_generator.py TSOP-I, 40 Pin (http://www.ti.com/lit/ds/symlink/dac7750.pdf#page=54), generated with kicad-footprint-generator Molex Sabre Power Connector, 46007-1106, With thermal vias in pads, 5 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator Molex Molex 1.00mm Pitch Easy-On BackFlip, Right-Angle, Bottom Contact FFC/FPC, 200528-0230, 23 Circuits (http://www.molex.com/pdm_docs/sd/5022502391_sd.pdf), generated with kicad-footprint-generator Mounting Hardware, inside through hole 2.7mm, height 1, Wuerth electronics 9775026360 (https://katalog.we-online.com/em/datasheet/9775026360.pdf), generated with kicad-footprint-generator Molex CLIK-Mate series connector.
- QFN, 38 Pin (http://www.ti.com/lit/ds/symlink/tlc5951.pdf#page=47&zoom=140,-67,15.
- 100644 Hardware/PCB/precadsr/ao_tht.pretty/D_DO-41_SOD81_P7.62mm_Horizontal.kicad_mod create mode 100644.
- L_Toroid, Vertical series, Radial, pin pitch=10.00mm, .
- SMD 1x18 1.00mm single row.