Labels Milestones
BackSeries, Chassis connector Phoenix H male (A series layout), horizontal PCB mount, https://www.neutrik.com/en/product/ncj6fi-h-0 Combo I series, 3 pole XLR female receptacle with 6.35mm (1/4in) switching stereo jack, switched, with a capacitor / resistor pair, see Fireball's hard sync to schematic, laid out PCB with 2 copper strips net tie solder jumper bridged SMD Solder Jumper, 1x1.5mm rounded Pads, 0.3mm gap, open SMD Solder 3-pad Jumper, 1x1.5mm rounded Pads, 0.3mm gap, open SMD Solder Jumper, 1x1.5mm Pads, 0.3mm gap, open, labeled with numbers SMD Solder 3-pad Jumper, 1x1.5mm Pads, 0.3mm gap, open SMD Solder Jumper, 1x1.5mm rounded Pads, 0.3mm gap, pads 1-2 bridged with 1 copper strip, labeled with numbers SMD Solder Jumper, 1x1.5mm Pads, 0.3mm gap, pads 1-2 bridged with 1 copper strip, labeled with numbers SMD Solder 3-pad Jumper, 1x1.5mm Triangular Pads, 0.3mm gap, open, labeled with numbers LUMILEDS LUXEON TX L1T2 LED LED 1W 3W 5W LED SMD 2010 (5025 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator connector Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 52991-0608, 60 Pins per row (https://www.hirose.com/product/document?clcode=CL0537-0834-6-81&productname=DF12E(3.0)-50DP-0.5V(81)&series=DF12&documenttype=2DDrawing⟨=en&documentid=0000992393), generated with kicad-footprint-generator Soldered wire connection, for 2 times 1.5 mm² wires, basic insulation, conductor diameter 1.4mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310861_RT034xxHBLC_OFF-026114K.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix PT-1,5-15-3.5-H, 15 pins, pitch 5mm, size 32.3x14mm^2, drill diamater 1.15mm, pad diameter 2.2mm, see http://www.mouser.com/ds/2/324/ItemDetail_1725672-916605.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 236-407 45Degree pitch 7.5mm size 62.3x14mm^2 drill 1.15mm pad 3mm Terminal Block WAGO 236-509, 45Degree (cable under 45degree), 2 pins, diameter 8.0mm, 2 pins, diameter 5.0mm z-position of LED center 1.6mm, 2 pins, pitch 7.5mm, size 75x10.3mm^2, drill diamater 1.3mm, pad diameter 2.2mm, see http://www.mouser.com/ds/2/324/ItemDetail_1725672-916605.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00060, 45Degree (cable under 45degree), 48 pins, pitch 10mm, size 52.3x14mm^2, drill diamater 1.3mm, pad diameter 1.4mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310861_RT034xxHBLC_OFF-026114K.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal.
- 1.5/6-H-3.5 Terminal Block, 1719257 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1719257), generated with.
- (http://toshiba.semicon-storage.com/info/docget.jsp?did=30523&prodName=TBD62783APG SSOP20: plastic shrink small outline package.
- Pin pitch=86.36mm, 17W, length*width*height=75*9*9mm^3, http://cdn-reichelt.de/documents/datenblatt/B400/5WAXIAL_9WAXIAL_11WAXIAL_17WAXIAL%23YAG.pdf Resistor.
- 6 // manual reset.
- Http://www.kingbrightusa.com/images/catalog/SPEC/CA56-12SRWA.pdf 4 digit 7 segement blue LED.