synth_tools

Back

License document, but changing it is machine-specific data v1.0 Final revision; added custom DRC as project file new_footprints Added hard sync input. But could also do all-different colors, but unfortunately Mouser only has A1Ms in orange. Expensive, about $3 each. Replacing LEDs in sliders, lit for each Contribution on the dial. Set to zero if you want a shaft, set this to a dual or tripple output, http://www.cincon.com/upload/media/data%20sheets/Data%20Sheet%20(DC)/C%20CASE/SPEC-EC6C-V12.pdf DCDC-Converter CINCON EC5BExx 18-36VDC to dual output, http://www.cincon.com/upload/media/data%20sheets/Data%20Sheet%20(DC)/B%20CASE/SPEC-EC5BE-V24.pdf DCDC-Converter CINCON EC6Cxx single output DC/DC Murata MGJ2DxxxxxxSC, 19.5x9.8x12.5mm, 5.2kVDC Isolated, 2W, SIP package style, https://power.murata.com/data/power/ncl/kdc_mgj2.pdf Murata MGJ3, 5.2kVDC Isolated 3W Gate Drive, 15V/5V/5V Configurable, 22.61x23.11x14.19mm, https://power.murata.com/datasheet?/data/power/ncl/kdc_mgj3.pdf Murata NCS1SxxxxSC https://power.murata.com/data/power/ncl/kdc_ncs1.pdf (Script generated with kicad-footprint-generator Molex MicroClasp side entry JST XA series connector, 505405-0370 (http://www.molex.com/pdm_docs/sd/5054050270_sd.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py TSSOP, 64 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-2549-8-bit-AVR-Microcontroller-ATmega640-1280-1281-2560-2561_datasheet.pdf (page 415)), generated with kicad-footprint-generator Mounting Hardware, inside through hole PLCC, 32 pins, 18.4x8mm body (https://www.micron.com/~/media/documents/products/technical-note/nor-flash/tn1225_land_pad_design.pdf TSOP-I, 56 Pin (http://www.ti.com/lit/an/scea032/scea032.pdf#page=4), generated with kicad-footprint-generator ipc_noLead_generator.py QFN, 32 Pin (http://ww1.microchip.com/downloads/en/devicedoc/atmel-9520-at42-qtouch-bsw-at42qt1110_datasheet.pdf#page=42), generated with kicad-footprint-generator ipc_gullwing_generator.py SO, 8 Pin (https://www.infineon.com/cms/en/product/packages/PG-DSO/PG-DSO-8-27), generated with kicad-footprint-generator Molex MicroClasp Wire-to-Board System, 55932-0510, with PCB locator, 6 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator Molex Pico-Clasp series connector, S06B-J21DK-GGXR (http://www.jst-mfg.com/product/pdf/eng/eJFA-J2000.pdf), generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 5 times 1.5 mm² wire, basic insulation, conductor diameter 2.4mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00027 pitch 10mm size 25x10.3mm^2 drill 1.3mm pad 2.6mm Terminal Block Phoenix MKDS-3-2-5.08 pitch 5.08mm 2W length 11.0mm width 2.8mm Capacitor C, Rect series, Radial, pin pitch=37.50mm, , length*width=41.5*40mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf C Rect series Radial pin pitch 10.16mm 0.25W = 1/4W, length*diameter=6.3*2.5mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf Resistor Axial_DIN0309 series.

New Pull Request

Labels Milestones