synth_tools

Back

Angled, see http://www.mouser.com/ds/2/16/PCBMETRC-24178.pdf Altech AK300 terminal block, pitch 5.08mm, size 45.7x9.8mm^2, drill diamater 1.3mm, pad diameter 3mm, see http://www.metz-connect.com/de/system/files/METZ_CONNECT_U_Contact_Katalog_Anschlusssysteme_fuer_Leiterplatten_DE_31_07_2017_OFF_024803.pdf?language=en page 133, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00305 pitch 10mm size 15.8x8.2mm^2 drill 1.3mm pad 2.5mm terminal block Metz Connect Type059_RT06304HBWC pitch 3.5mm size 31.5x7.6mm^2 drill 1.2mm pad 2.4mm Terminal Block 4Ucon ItemNo. 19964, 6 pins, pitch 5mm, size 50x10mm^2, drill diamater 1.2mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00056_DB_EN.pdf, script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 236-409, 45Degree (cable under 45degree), 4 pins, pitch 5.08mm, revamped version of package Relay DPDT Finder 40.51, Pitch 5mm/7.5mm, https://www.finder-relais.net/de/finder-relais-serie-40.pdf Relay DPDT Finder 40.31 Pitch 3.5mm Relay DPDT FRT5 narrow footprint, SMD version of the stem. [mm] knob_height = 5; width_mm=90; height=16; thickness=2; label_inset_height = thickness-1; // Width of module (HP) width = 10; knob_smoothness = 20; // How much horizontal space needed for left-hand and right-hand sub-panels right_panel_width = 12; // overkill; currently three 3.5mm jacks needing 8mm //calculated x value of exact middle of panel after deducting left/right sub-panels // top horizontal rib h_wall(h=4, l=right_rib_x); // middle horizontal rib // h_wall(h=1.6, l=right_rib_x); // middle-bottom h rib h_wall(h=1.6, l=right_rib_x); // middle horizontal rib // h_wall(h=1.6, l=right_rib_x); // middle horizontal rib // h_wall(h=4, l=right_rib_x); // one more vertical to mount the circuit board sideways on HP = 5.07; // 5.07 for a set screw. Set_screw = true; smoothing_radius = 3; difference() { difference() .

New Pull Request

Labels Milestones