synth_tools

Back

SIP socket, 2.54 mm, 1x2 (see build notes) 1 SIP socket, 2.54 mm, 1x4 | | J3 | 1 | B10k | \*\*Potentiometer, 16 mm vertical board mount | | R31 | 1 | 1 | AudioJack2_SwitchT | Audio Jack, 2 x switching (normalling) stereo jack without switching contact, horizontal PCB mount, https://www.neutrik.com/en/product/nc5fbv A Series, 3 pole female XLR receptacle, grounding: separate ground contact connected to trigger, gate jack is normalized\nto +12 V, and sustain voltage is taken from \npot pin 1 x 1 mm, 734-168 , 8 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator Molex Molex 1.00mm Pitch Easy-On BackFlip, Right-Angle, Bottom Contact FFC/FPC, 200528-0090, 9 Circuits (https://www.molex.com/pdm_docs/sd/2005280090_sd.pdf), generated with kicad-footprint-generator Fuse SMD 1210 (3225 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 80, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator Molex SPOX horizontal Molex SPOX Connector System, 43045-0400 (alternative finishes: 43045-200x), 10 Pins (http://www.molex.com/pdm_docs/sd/559350530_sd.pdf), generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for a single 0.15 mm² wires, basic insulation, conductor diameter 0.9mm, outer diameter 3.5mm, size 50x8.3mm^2, drill diamater 1.1mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Philmore pitch 5mm Varistor, diameter 21.5mm, width 7.9mm, pitch 10mm Varistor, diameter 9mm, width 3.7mm, pitch 5mm size 35x9mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00298, 2 pins, http://www.kingbright.com/attachments/file/psearch/000/00/00/L-43GD(Ver.12B).pdf LED diameter 3.0mm z-position of LED center 1.0mm, 2 pins, pitch 3.5mm, size 8x8.3mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated with , script-generated with , script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block Metz Connect Type703_RT10N03HGLU pitch 9.52mm size 19x12.5mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00082, vertical (cable from top), 7 pins, pitch 3.5mm, size 39.5x8.3mm^2, drill diamater 1.15mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/2138224.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block TE 1-282834-0 pitch 2.54mm DCDC-Converter, RECOM, RECOM_R5xxxPA, SIP-12, pitch 2.54mm, package size 1006 3 pins IR-LED, diameter 3.0mm, 3 pins, pitch 7.5mm, size 17.3x14mm^2, drill diamater 1.15mm, pad diameter 2.3mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310591_RT063xxHBWC_OFF-022684T.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 236-107 45Degree pitch 5mm size 20x10mm^2 drill 1.3mm pad 2.5mm terminal block Metz Connect 360425 size 9x9mm^2 drill 1.6mm pad 3.2mm terminal block RND 205-00240 pitch 5.08mm size 50.8x10.6mm^2 drill 1.3mm pad 2.6mm terminal block RND 205-00017 pitch 5mm size 62.3x14mm^2 drill 1.15mm pad 3mm Terminal.

New Pull Request

Labels Milestones