Labels Milestones
BackWill be thinner than this // for cylinder indentations, set quantity, quality, radius, height, and placement cylinder_starting_rotation = -33.3; // these are for steps only row_1 = bottom_row + v_margin + 12; row_2 = working_increment*1 + row_1; row_3 = working_increment*2 + row_1; row_4 = row_3 + vertical_space/7; cv_in_1a = [left_col, row_3, 0]; cv_in_2b = [right_col, row_7, 0]; manual_1 = [left_col, row_5, 0]; audio_out_1 = [right_col, row_5, 0]; audio_out_1 = [right_col, row_5, 0]; cv_in_2a = [left_col, row_5, 0]; cv_in_2a = [left_col, row_1, 0]; pwm_in = [input_column - h_margin/2, bottom_row, 0]; pwm_pot = [input_column - h_margin/2, bottom_row, 0]; pwm_duty = [input_column, bottom_row, 0]; pwm_duty = [second_col, first_row, 0]; c_tune = [second_col, fourth_row, 0]; triangle_out = [third_col, fourth_row, 0]; //Fifth row interface placement f_tune = [second_col, third_row, 0]; //Fourth row interface placement sync_in = [first_col, fourth_row, 0]; //Fifth row interface placement f_tune = [h_margin+working_width/8, row_4, 0]; pwm_cv_lvl = [width_mm - h_margin - working_width/8, row_2, 0]; fm_lvl = [h_margin+working_width/8, row_2, 0]; audio_in_2 = [left_col, row_2, 0]; fm_lvl = [second_col, third_row, 0]; saw_out = [output_column, row_2, 0]; fm_lvl = [second_col, first_row, 0]; sync_in = [first_col, fifth_row, 0]; square_out = [width_mm-h_margin, row_1, 0]; triangle_out = [width_mm-h_margin-working_width/4, row_1, 0]; fm_pot = [input_column - h_margin/2, bottom_row, 0]; pwm_duty = [width_mm - h_margin - working_width/8, row_4, 0]; left_rib_x = thickness * 1; //right_rib_x = width_mm - col_right; // column from edge plus hole radius Panels/10_step_seq_38hp_v3.1.step_nob_up.scad Normal file View File Find and replace last few.
New Pull Request