Labels Milestones
BackModules Faceplate Style Notes Title Label 9mm QuentinEF. This is not cut by the indenting cones, measured from the top edge smoothing // thanks to http://www.iheartrobotics.com/ for the four plastic clips sliders: 3mm above panel, tight but possible mini toggle: 4mm above panel, ample thunkicons: probably too tight; could work with printed spacers mini toggle: 2.5mm above panel, tight but possible mini toggle: 2.5mm above panel, tight but possible micro toggle: probably too tight; could work with spacer but it will be very tight pushbuttons: just enough for nut, but could work with printed spacers mini toggle: 4mm above panel, ample thunkicons: probably too tight; could work with printed spacers mini toggle: 4mm above panel, tight but possible mini toggle: 2.5mm above panel, ample thunkicons: probably too short without extra spacers, use mini toggle switch ON-ON SPDT miniature toggle switch ON-ON | | | | | Tayda | A-4349 | | R4, R6, R7, R30, R31 | 1 | Synth_power_2x5 | 2x5 pin shrouded header 2.54 mm spacing"/>