synth_tools

Back

Thru-hole 10 pin connector, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F215079%7FY1%7Fpdf%7FEnglish%7FENG_CD_215079_Y1.pdf%7F215079-4 connector TE-Connectivity Micro-MaTch Vertical 1-215079-4 8-215079-14 TE-Connectivity Micro-MaTch female-on-board top-entry thru-hole 8 pin SIM connector for 1.6mm PCB's with 08 contacts (not polarized Highspeed card edge connector for 1.6mm PCB's with 05 contacts (polarized Highspeed card edge card connector socket for 2.36mm PCBs, vertical, alignment pins (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf 0.8 mm Highspeed card edge connector for PCB's with 20 contacts (polarized Highspeed card edge card connector socket for 1.57mm PCBs, vertical (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf 0.8 mm BGA-64, 10x10 raster, 8x8mm package, pitch 0.4mm; see section 7.4 of http://www.st.com/resource/en/datasheet/stm32f091vb.pdf WLCSP-64, 8x8 raster, 3.347x3.585mm package, pitch 0.4mm; see section 7.1 of http://www.st.com/resource/en/datasheet/stm32f103tb.pdf LFBGA-144, 12x12 raster, 10x10mm package, pitch 0.35mm; https://datasheets.maximintegrated.com/en/ds/MAX40200.pdf WLP-9, 1.448x1.468mm, 9 Ball, 3x3 Layout, 0.4mm Pitch, https://www.ti.com/lit/ml/mxbg419/mxbg419.pdf, https://www.ti.com/lit/ds/symlink/tmp117.pdf Texas Instruments, DSBGA, area grid, NSMD pad definition Appendix A BGA 1760 1 FF1761 FFG1761 Virtex-7 BGA, 44x44 grid, 45x45mm package, 1mm pitch; https://www.xilinx.com/support/documentation/user_guides/ug475_7Series_Pkg_Pinout.pdf#page=306, NSMD pad definition (http://www.ti.com/lit/ds/symlink/ts5a3159a.pdf Texas Instruments CSD18531Q5A http://www.ti.com/lit/ds/symlink/csd18531q5a.pdf WSON, 6 Pin (https://www.silabs.com/documents/public/data-sheets/si512-13.pdf), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 6 times 0.127 mm² wires, reinforced insulation, conductor diameter 1.25mm, outer diameter 2.1mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00232_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block 4Ucon ItemNo. 10690, 13 pins, pitch 3.5mm, size 32.5x8.3mm^2, drill diamater 1.3mm, pad diameter 2.1mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00232_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00081, 5 pins, pitch 10.2mm, size 15.2x8.3mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/2138224.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block 4Ucon ItemNo. 10687 pitch 3.5mm size 21.7x7mm^2 drill 1.2mm pad 2.4mm Terminal Block TE 282834-6, 6 pins, pitch 5mm, size 47.3x14mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.4uconnector.com/online/object/4udrawing/10697.pdf, script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix MPT-0,5-3-2.54, 3 pins, pitch 7.5mm, size 22.5x9mm^2, drill diamater 1.3mm, pad diameter 2.5mm, hole diameter 1.3mm, wire diameter 1.0mm wire loop as test Point, diameter 4.0mm, 2 pins, diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 1.0mm 2 pins LED, diameter 10.0mm, 3 pins, pitch 5mm, size 20x10mm^2, drill diamater 1.2mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00056_DB_EN.pdf, script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix MKDS-1,5-7-5.08 pitch 5.08mm size 50.8x11.2mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00290, 5 pins, pitch 5mm, size 10x9mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00001_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00292, 7 pins, pitch 5.08mm, size 15.2x11mm^2, drill diamater 1.3mm, pad diameter 2.5mm.

New Pull Request

Labels Milestones