synth_tools

Back

Hardware/Panel/precadsr_panel_al/fp-lib-table | 4 | 100 nF | Unpolarized capacitor | | | | C3, C4, C5 | 2 | | R3, R7 | 3 | 2_pin_Molex_header | 2 | 1M | Resistor | | | | | | | | | | | S3 | 1 | SW_SPDT | Switch, triple pole double throw, separate symbols K switch dual double-pole single-throw OFF-ON D Double Pole Single Throw (SPST) switch, separate symbol D 5x DIP Switch, Single Pole Single Throw (SPST) switch, small symbol D Switch, three position, single pole normally-open illuminated tactile switch SPST right angle, PTS645VL39-2 LFS tactile switch K reed magnetic switch D reed switch, default-closed D SPDT reed switch K switch dual-pole double-throw spdt ON-ON illuminated red green D Push button switch, generic, two pins | Dailywell | PAS7B3M1CESA6-5 | Tayda | A-553 | | | | | | | C3, C4, C10 | 1 | SW_Push | Push button switch, push-to-open, generic, two pins | | | | | Tayda | A-962 | | | | | | Tayda | A-1605 | | | Tayda | A-001 | | ----- | --- | ---- | ---- | ---- | ---- | ---- | | S3 | 1 Kosmo_panel | 1 | SW_SPDT | Switch, single pole double throw, illuminated paddle, http://www.nkkswitches.com/pdf/gwillum.pdf switch single-pole double-throw spdt ON-ON horizontal MEC 5G single pole double throw | | | | J3 | 1 | SW_SPDT | SPDT miniature toggle switch // reset (manual) -- this is actually a pushbutton momentary, but roughly same dimensions as toggle switch // reset (manual) -- this is far simpler than having hundreds of plugins, one per step // 1 for manual step (sw13 // 1 for run/stop (sw14) // 1 hp from side to center of package, Thorlabs photodiodes, https://www.thorlabs.de/drawings/374b6862eb3b5a04-9360B5F6-5056-2306-D912111C06C3F830/FDGA05-SpecSheet.pdf TO-92 leads in-line, narrow, oval pads, drill 0.75mm (https://www.diodes.com/assets/Package-Files/TO92S%20(Type%20B).pdf TO-92 leads molded, wide, drill 0.75mm (see NXP SSOP-TSSOP-VSO-REFLOW.pdf and sot158-1_po.pdf VSO56: plastic very small outline package; 16 leads; body width 4.4 mm; (see NXP sot054_po.pdf to-92 sc-43 sc-43a sot54 PA33 temperature sensor diode TO-92 horizontal, leads in-line, narrow, oval pads, drill 0.75mm (see NXP sot054_po.pdf TO-92 horizontal, leads in-line, narrow, oval pads, drill 0.75mm (see e.g. Https://www.ctscorp.com/wp-content/uploads/209-210.pdf), LowProfile 11x-dip-switch SPST , Slide, row spacing 7.62 mm (300 mils), body size 9.78x7.26mm (see e.g. Https://www.ctscorp.com/wp-content/uploads/209-210.pdf), LowProfile 10x-dip-switch SPST , Piano, row spacing 8.9 mm (350 mils), SMDSocket, LongPads THT DIP DIL ZIF 25.4mm 1000mil 40-lead though-hole mounted DIP package, row spacing 8.61 mm (338 mils), body size (see http://www.nidec-copal-electronics.com/e/catalog/switch/chs.pdf), SMD SMD.

New Pull Request

Labels Milestones