synth_tools

Back

Ublox NEO 6/7/8 GPS Module, 15.5x15.5x6.3mm, https://www.u-blox.com/sites/default/files/SAM-M8Q_HardwareIntegrationManual_%28UBX-16018358%29.pdf GPS GNSS ublox ZED GSM NB-IoT Module BC66 M66 GSM NB-IoT module BC95 Quad-Band GSM/GPRS module, 24x24x3mm, http://simcom.ee/documents/SIM900/SIM900_Hardware%20Design_V2.05.pdf Telit xL865 familly footprint, http://www.telit.com/fileadmin/user_upload/products/Downloads/3G/Telit_UL865_Hardware_User_Guide_r8.pdf ublox Sara GSM/HSPA modem, https://www.u-blox.com/sites/default/files/SARA-G3-U2_SysIntegrManual_%28UBX-13000995%29.pdf, pag.162 ublox SARA-G3 SARA-U2 GSM HSPA Footprint for Mini-Circuits cas HZ1198 (https://ww2.minicircuits.com/case_style/HZ1198.pdf) following land pattern PL-176, including GND vias (https://www.minicircuits.com/pcb/98-pl176.pdf Footprint for Mini-Circuits case MMM168, Land pattern PL-094, pads 5 and 6); middle of panel after deducting left/right sub-panels slider_center = (width_mm - left_panel_width - right_panel_width)/2 + left_panel_width; slider_bottom = v_margin+12; slider_bottom = v_margin+12; Experimenting with more panel layout ideas left_rib_x = thickness * 1; right_rib_x = width_mm - thickness*2.2; footprint "SLIDE_POT_0547" (version 20221018) (generator pcbnew Latest commits for file Panels/Futura Heavy BT.ttf (grid_origin 84.5 17.5 Mark board for extraction A symbol representing annotation for tab placement (condition "A.Type == 'pad' && B.Type == A.Type" condition "A.Type == 'track'")) # This would override board outline and milled areas # (condition "A.Type == 'pad' && (B.Type == 'text' || B.Type == A.Type && A.Net == B.Net" (condition "A.Type == 'pad' && (B.Type == 'text' || B.Type == A.Type" condition "A.Type == 'pad' && !A.isPlated()" (condition "A.Type == 'pad' && (B.Type == 'text' || B.Type == A.Type" condition "A.Type == 'pad' && !A.isPlated()" (condition "A.Type == 'pad' && A.Fabrication_Property == 'Castellated pad'" (condition "A.Net != B.Net" (condition "A.Type == 'via' && B.Type == A.Type" (condition "A.Type == 'via' && B.Type == A.Type && A.Net == B.Net" (condition "A.Pad_Type == 'NPTH, mechanical' && B.Type == 'track'" (condition "A.Type == 'track' && B.Layer == 'Edge.Cuts'")) # drill/hole size condition "A.Type == 'track' && B.Layer == 'Edge.Cuts'" condition "A.Type == 'track'" (condition "A.Type == 'via' && B.Type == 'track'" condition "A.Type == 'via' && B.Type == 'track'" condition "A.Type == 'pad' && A.Fabrication_Property == 'Castellated pad'")) # clearance If desired, copy the files and the code they affect. Such description must be non-zero.) ShaftDiameter = 10.

New Pull Request

Labels Milestones