Labels Milestones
BackNuts, and spacers (see [build notes](build.md)) | | R14, R15, R18 | 3 | AudioJack2 | Audio Jack, 2 x switching (normalling) stereo jack (T/R/S), https://www.neutrik.com/en/product/nj3fd-v 6.35mm (1/4 in) Vertical Jack, Non-switching mono jack without switching contact, vertical PCB mount, https://www.neutrik.com/en/product/ncj6fa-h Combo A series, 3 pole female XLR receptacle, grounding: mating connector shell and front panel, vertical PCB mount, self tapping screw holes (A-screw), horizontal PCB mount, retention spring instead of latch, https://www.neutrik.com/en/product/nc3fahl-0 A Series, 3 pole XLR female receptacle with 6.35mm (1/4in) stereo jack, switched, with a footprint that has wider spacing for the four plastic clips sliders: 3mm above panel, tight but possible mini toggle: 4mm above panel, ample thunkicons: probably too short without extra spacers, use mini toggle pushbuttons: ample space above 11.75mm (existing 1p12t rotaries, use 11.25mm holes to PCB edge 9.12mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf 15-pin D-Sub connector horizontal angled 90deg THT male pitch 2.77x2.84mm pin-PCB-offset 9.4mm 44-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, female, pitch 2.29x2.54mm, pin-PCB-offset 9.4mm, see http://docs-europe.electrocomponents.com/webdocs/1585/0900766b81585df2.pdf 9-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, female, pitch 2.77x2.54mm, pin-PCB-offset 9.4mm, see http://docs-europe.electrocomponents.com/webdocs/1585/0900766b81585df2.pdf 37-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, male.
- 32.3x14mm^2 drill 1.15mm pad 3mm.
- System, 55932-0610, with PCB cutout, light-direction upwards, see.