synth_tools

Back

SPST button switch with LED, generic K switch normally-open pushbutton push-button LED D MEC 5G single pole double throw, illuminated paddle, http://www.nkkswitches.com/pdf/gwillum.pdf switch single-pole double-throw ON-OFF-ON D Single Pole Single Throw (DPST) Switch, temperature dependent Schematics/SynthMages.pretty/Switch.lib Normal file View File 3D Printing/Rails/36hp_outie.stl Normal file Unescape REP: repique CAX: caixa MSD: mid surdo (sometimes MS1, MS2, etc, if multiple measures or variations BSD: back surdo // 1 for 5v / 2.5v output mode (sw12) // 1 for manual reset (sw16 // 8 Sockets: // clock out (j5/j12) // glide in (sleeve and normal both GND 6x Sockets, 2pin: - all step switches (all go to same bus) - run/stop 2x Pushbutton switches, all 2pin: - reset Pots, 3-pin: - Glide attenuator (B10k) (join two left pins from below Pots, 2-pin: Glide, manual (A100k) (two left pins, from below Clock rate goes down when resistance goes up, opposite to expectation. C1 is too small for a single 0.127 mm² wires, reinforced insulation, conductor diameter 0.9mm, outer diameter 1.7mm, outer diameter 1.7mm, outer diameter 2mm, see http://www.produktinfo.conrad.com/datenblaetter/550000-574999/556444-da-01-de-LEITERPLATTENKL__PTSM_0_5__4_2_5_V_THR.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 236-602, 45Degree (cable under 45degree), 10 pins, pitch 5mm, size 30x10mm^2, drill diamater 1.1mm, pad diameter 3mm, see http://www.produktinfo.conrad.com/datenblaetter/550000-574999/556441-da-01-de-LEITERPLATTENKL__PTSM_0_5__8_2_5_H_THR.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 804-102, 45Degree (cable under 45degree), 7 pins, pitch 5.08mm, size 15.2x9.8mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00276_DB_EN.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00058, 45Degree (cable under 45degree), 3 pins, pitch 5mm, size 10x8.3mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00001_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00075, 10 pins, pitch 10mm, size 55x10.3mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.4uconnector.com/online/object/4udrawing/10702.pdf, script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block TE 282834-5, 5 pins, pitch 3.5mm, size 15x8.3mm^2, drill diamater 1.2mm, pad diameter 1.4mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310861_RT034xxHBLC_OFF-026114K.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix MKDS-1,5-8, 8 pins, pitch 5mm, size 75x9.8mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 236-306, 45Degree (cable under 45degree), 7 pins, pitch 10mm, size 85x8.1mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00304 pitch 10mm Varistor, diameter 12mm, width 4.5mm, pitch 10mm size 45.8x8.2mm^2 drill.

New Pull Request

Labels Milestones