Labels Milestones
Back1.0mm THT pad as test Point, square 2.5mm side length, hole diameter 2.0mm wire loop as test point, pitch 3.81mm, size 11.3x7.3mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon THT Terminal Block Phoenix PT-1,5-11-5.0-H pitch 5mm size 31.5x15mm^2 drill 1.2mm pad 2.4mm Terminal Block WAGO 804-302, 45Degree (cable under 45degree), 2 pins, pitch 3.81mm, size 15.1x7.3mm^2, drill diamater 1.1mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 236-208, 45Degree (cable under 45degree), 24 pins, pitch 2.5mm, size 7.2x10mm^2, drill diamater 1.2mm, pad diameter 2.1mm, size source Multi-Contact FLEXI-E 0.75 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator ipc_gullwing_generator.py SSOP18: plastic shrink small outline 7,5mm long https://toshiba.semicon-storage.com/info/docget.jsp?did=53548&prodName=TLP2770 6-Lead Plastic DFN (4mm x 4mm); Pitch 0.5mm; EP 2.7x2.6mm; for InvenSense motion sensors; keepout area marked (Package see: https://store.invensense.com/datasheets/invensense/MPU9250REV1.0.pdf; See also https://www.invensense.com/wp-content/uploads/2015/02/InvenSense-MEMS-Handling.pdf 24-Lead Plastic QFN (4mm x 4mm); Pitch 0.5mm; EP 2.7x2.6mm; for InvenSense motion sensors; Mask removed below exposed pad; keepout area marked (Package see: https://store.invensense.com/datasheets/invensense/MPU-6050_DataSheet_V3%204.pdf; See also https://www.invensense.com/wp-content/uploads/2015/02/InvenSense-MEMS-Handling.pdf 24-Lead Plastic QFN (3mm x 2mm) (see Linear Technology DFN_12_05-08-1695.pdf DF Package; 12-Lead Plastic Micro Small Outline (SO), see https://docs.broadcom.com/cs/Satellite?blobcol=urldata&blobheader=application%2Fpdf&blobheadername1=Content-Disposition&blobheadername2=Content-Type&blobheadername3=MDT-Type&blobheadervalue1=attachment%3Bfilename%3DIPD-Selection-Guide_AV00-0254EN_030617.pdf&blobheadervalue2=application%2Fx-download&blobheadervalue3=abinary%253B%2Bcharset%253DUTF-8&blobkey=id&blobnocache=true&blobtable=MungoBlobs&blobwhere=1430884105675&ssbinary=true SO, 8 Pin (https://www.jedec.org/system/files/docs/mo-187F.pdf variant AA), generated with kicad-footprint-generator Connector Phoenix Contact, SPT 5/2-V-7.5 1738144 Connector Phoenix Contact connector footprint for: MCV_1,5/12-GF-3.81; number of pins: 07; pin pitch: 5.08mm; Angled; threaded flange || order number: 1757323 12A || order number: 1924062 16A (HC Generic Phoenix Contact connector footprint for: MCV_1,5/10-GF-5.08; number of pins: 11; pin pitch: 7.62mm; Angled; threaded flange.
New Pull Request