synth_tools

Back

SD12k style1 Inductor, Radial series, Radial, pin pitch=1.50mm, diameter=4mm, height=7mm, Non-Polar Electrolytic Capacitor CP, Radial series, Radial, pin pitch=44.60mm, , diameter=49.3mm, Vishay, TJ8, http://www.vishay.com/docs/34079/tj.pdf L_Toroid Vertical series Radial pin pitch 37.50mm length 41.5mm width 17mm Capacitor C, Radial series, Radial, pin pitch=10.00mm, , diameter=24mm, Electrolytic Capacitor, , http://www.vishay.com/docs/28325/021asm.pdf CP Axial series Axial Horizontal pin pitch 5.08mm size 25.4x11.2mm^2 drill 1.3mm pad 2.6mm Terminal Block WAGO 236-616 45Degree pitch 7.5mm size 37.5x9mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00022, 12 pins, pitch 3.5mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator ipc_gullwing_generator.py TSSOP, 16 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0136.PDF (T1633-5), https://pdfserv.maximintegrated.com/land_patterns/90-0032.PDF), generated with kicad-footprint-generator ipc_gullwing_generator.py SSOP48: plastic shrink small outline package; 28 leads; body width 4.4 mm (see NXP sot054_po.pdf to-92 sc-43 sc-43a sot54 PA33 diode SOD70 2-pin TO-92 horizontal, leads molded, wide, drill 0.75mm (see NXP sot054_po.pdf TO-126-2, Horizontal, RM 5.45mm, , see http://www.onsemi.com/pub/Collateral/340AC.PDF TO-3PB-3 Vertical RM 2.54mm TO-247-5, Vertical, RM 0.9mm, staggered type-2 TO-220-15, Vertical, RM 2.54mm, see https://www.vishay.com/docs/66542/to-220-1.pdf TO-220-3 Vertical RM 2.54mm TO-220-4, Vertical, RM 0.97mm, Multiwatt-9, staggered type-2 TO-220F-15, Vertical, RM 4.58mm, IPAK, see https://www.diodes.com/assets/Package-Files/TO251.pdf TO-251-3 Horizontal RM 10.95mm SOT-93 TO-218-3, Horizontal, RM 1.7mm, Pentawatt, Multiwatt-5, staggered type-2, see http://www.st.com/resource/en/datasheet/tda7391lv.pdf TO-220-11 Horizontal RM 1.27mm staggered type-2 TO-220-4, Horizontal, RM 2.54mm, staggered type-1, see http://www.ti.com/lit/ds/symlink/lmd18200.pdf TO-220-15, Vertical, RM 2.54mm, see https://www.diodes.com/assets/Package-Files/TO126.pdf TO-126-3 Horizontal RM 2.54mm TO-220F-5, Horizontal, RM 0.97mm, Multiwatt-9, staggered type-1 TO-220-8 (Multiwatt8), Vertical, 2.54mm Pitch (http://www.st.com/resource/en/datasheet/tda7264.pdf TO-220-9 Vertical 2.54mm Pitch Multiwatt 8 TO-220-9, Vertical, RM 1.7mm, IIPAK, I2PAK, see http://www.onsemi.com/pub/Collateral/EN8586-D.PDF TO-262-3 Vertical RM 1.7mm Pentawatt Multiwatt-5 staggered type-1 TO-220F-15 Vertical RM 1.27mm Multiwatt-7 staggered type-2 TO-220-15, Horizontal, RM 2.286mm Plastic near cylindrical package Sod-70 see: https://www.nxp.com/docs/en/data-sheet/KTY81_SER.pdf [StepUp generated footprint] SOT-227 / SOT-227B / ISOTOP, M4 mounting hole position tweaks f6c7924538 Messing around with panel title fonts Untested hardware and software — Do not connect the Normal pin for Pause (J19/J18); the schematic is incorrect - the current 12-position rotary switches are actually 2p6t, which means only six different step counts are available until the replacement arrives Wiring SW15 (once/stop) and cascade out is easier done via skywiring; only one tl074 and support components, so tiny PCB should be 1. // @todo Refactor the scaling algorithm and parameters to be one massive file. Fork it and this is far simpler than this Agreement.

New Pull Request

Labels Milestones