synth_tools

Back

- Glide attenuator (B10k) (join two left pins from below Pots, 2-pin: Glide, manual (A100k) (two left pins, from below Clock rate goes down when resistance goes up, opposite to expectation. Schematic fixes: Trim 5mm from vertical for both panels, to make fitting inside a case easier. Or 10mm if it can fit; losing the bodge area. Assembly Tests: Glide In - U1-13 (can get at from top when assembled Stop Switch - 10 ohms between U1-14 and U2-1 when off, more like 1M ohms when off Glide In - diode to U2-3 Clock In Normal - 1k to U2-8 (AND NOT short to U2-10 - Clock rate (B100k) (not sure yet which 2 pins LED diameter 5.0mm z-position of LED center 3.0mm 3 pins LED diameter 10.0mm Neosid SD12 style2 Inductor, Radial series, Radial, pin pitch=28.70mm, , diameter=40.64mm, Vishay, IHB-5, http://www.vishay.com/docs/34015/ihb.pdf Inductor Radial series Radial pin pitch 20.80mm length 48.8mm width 25.4mm Vishay TJ8 L_Toroid, Vertical series, Radial, pin pitch=20.00mm, 10W, length*width=26.0*5.0mm^2, http://www.produktinfo.conrad.com/datenblaetter/425000-449999/443860-da-01-de-METALLBAND_WIDERSTAND_0_1_OHM_5W_5Pr.pdf Resistor Box series Radial pin pitch 10.00mm length 13mm width 4mm Capacitor C, Rect series, Radial, pin pitch=15.80mm, , length*width=41.9*19.1mm^2, Vishay, TJ7, http://www.vishay.com/docs/34079/tj.pdf L_Toroid Horizontal series Radial pin pitch 30.48mm length 26mm diameter 10mm Fastron 07M Inductor, Radial series, Radial, pin pitch=7.50mm, , length*width=9*3.9mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf C Rect series Radial pin pitch 10.00mm length 11.5mm width 3.5mm Capacitor C, Rect series, Radial, pin pitch=10.00mm, , diameter=35mm, Electrolytic Capacitor, , http://www.vishay.com/docs/28342/058059pll-si.pdf CP Radial series Radial pin pitch 3.50mm diameter 8mm Electrolytic Capacitor CP, Axial series, Axial, Horizontal, pin pitch=15.24mm, 1W, length*diameter=9.9*3.6mm^2.

New Pull Request

Labels Milestones