synth_tools

Back

M68 MBGA Altera VBGA V81 BGA-81 Altera BGA-100 M100 MBGA 121-ball, 0.8mm BGA (based on http://www.latticesemi.com/view_document?document_id=213 Lattice caBGA-756, ECP5 FPGAs, 27.0x27.0mm, 756 Ball, 32x32 Layout, 0.8mm Pitch, https://www.micron.com/-/media/client/global/documents/products/data-sheet/dram/ddr3/4gb_ddr3l.pdf#page=28 FBGA-96, 14.0x9.0mm, 96 Ball, 9x16 Layout, 0.8mm Pitch, https://www.st.com/resource/en/datasheet/stm32mp151a.pdf ST UFBGA-73, 5.0x5.0mm, 73 Ball, 9x9 Layout, 0.5mm Pitch, https://www.ti.com/lit/ds/symlink/dac80508.pdf Analog LFCSP, 16 Pin (https://www.st.com/resource/en/datasheet/stp08cp05.pdf#page=20), generated with kicad-footprint-generator connector Molex KK-396 horizontal Molex KK 396 Interconnect System, old/engineering part number: 26-60-5170, 17 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-123-02-xxx-DV-BE-LC, 23 Pins per row (http://www.molex.com/pdm_docs/sd/530480210_sd.pdf), generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 3 times 0.75 mm² wires, reinforced insulation, conductor diameter 1.7mm, size source Multi-Contact FLEXI-E 1.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times 0.25 mm² wire, reinforced insulation, conductor diameter 1.4mm, outer diameter 2.7mm, size source Multi-Contact FLEXI-E 2.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Net tie, 2 pin, 2.0mm square SMD pads Net tie, 3 pin, 0.3mm round THT pads Net tie, 2 pin, 0.3mm round THT pads Net tie, 3 pin, 2.0mm square SMD pads Net tie, 3 pin, 0.3mm round THT pads Net tie, 3 pin, 1.0mm round THT pads Net tie, 2 pin, 0.5mm square SMD rectangular pad as test Point, square 4.0mm side length, hole diameter 1.0mm THT pad THT pad as test point, loop diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00001_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00077 pitch 7.5mm Varistor, diameter 7mm, width 3.6mm, pitch 5mm size 15x7.6mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00067 pitch 7.5mm Varistor, diameter 21.5mm, width 11.4mm, pitch 10mm size 55x9mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00014 pitch 5mm size 32.3x14mm^2 drill 1.15mm pad 3mm Terminal Block 4Ucon ItemNo. 10686, 9 pins, pitch 5mm, size 25x9.8mm^2, drill diamater 1.3mm.

New Pull Request

Labels Milestones