synth_tools

Back

Button SW PUSH SMALL http://www.ckswitches.com/media/1457/ksa_ksl.pdf SW PUSH SMALL Tactile C&K Generic Buzzer, D15mm height 7.5mm with RM7.6mm Generic Buzzer, D14mm height 7mm Non-Polar Electrolytic Capacitor CP, Axial series, Axial, Vertical, pin pitch=5.08mm, , length*diameter=26*11mm^2, Fastron, 77A, http://cdn-reichelt.de/documents/datenblatt/B400/DS_77A.pdf Inductor Axial series Axial Horizontal pin pitch 15.00mm length 18mm diameter 10mm Electrolytic Capacitor CP Radial series Radial pin pitch 40.64mm 7W length 25mm width 9mm Alps rotary encoder, PEC09, with switch, vertical shaft, http://www.alps.com/prod/info/E/HTML/Encoder/Incremental/EC12E/EC12E1240405.html & http://cdn-reichelt.de/documents/datenblatt/F100/402097STEC12E08.PDF Alps rotary encoder, PEC09, with switch, horizontal shaft, https://www.bourns.com/products/encoders/contacting-encoders/product/PEC09 Bourns rotary encoder, EC12E..., vertical shaft, http://www.alps.com/prod/info/E/HTML/Encoder/Incremental/EC12E/EC12E1240405.html Alps rotary encoder, EC12E... With switch, vertical shaft, http://www.alps.com/prod/info/E/HTML/Encoder/Incremental/EC11/EC11E15204A3.html Alps rotary encoder, PEC09, without switch, horizontal shaft, https://www.bourns.com/docs/product-datasheets/pec12r.pdf Sensortech MiCS MEMS sensor Infineon, IP57, XENSIV, LGA-5, https://www.infineon.com/dgdl/Infineon-IM73A135-DataSheet-v01_00-EN.pdf?fileId=8ac78c8c7f2a768a017fadec36b84500 MEMS Microphone LGA Dust Water TDK InvenSense MEMS I2S ICS-43434 TDK InvenSense MEMS I2S Microphone: https://www.knowles.com/subdepartment/dpt-microphones/subdpt-sisonic-surface-mount-mems microphone MEMS I2S Microphone: https://invensense.tdk.com/products/ics-43434/ microphone MEMS I2S SPH0645LM4H Knowles Sensirion, SHT40, SHT41, SHT45, DFN, 4 Pin (https://www.onsemi.com/pub/Collateral/MDB8S-D.PDF#page=4), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-127-02-xx-DV-PE-LC, 27 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator Hirose DF11 through hole, DF11-10DP-2DSA, 5 Pins (https://www.molex.com/pdm_docs/sd/009652028_sd.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py TDFN, 8 Pin (https://media.digikey.com/pdf/Data%20Sheets/Rohm%20PDFs/BD9G341EFJ.pdf), generated with kicad-footprint-generator JST GH series connector, 505405-0970 (http://www.molex.com/pdm_docs/sd/5054050270_sd.pdf), generated with kicad-footprint-generator Molex Nano-Fit Power Connectors, old mpn/engineering number: 5566-22A, example for new part number: 22-27-2131, 13 Pins (http://www.molex.com/pdm_docs/sd/022272021_sd.pdf), generated with kicad-footprint-generator JST ZE horizontal JST PHD series connector, 501331-1307 (http://www.molex.com/pdm_docs/sd/5013310207_sd.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py TDFN, 12 Pads, No exposed, http://www.st.com/resource/en/datasheet/stm6600.pdf TDFN, 14 Pin (https://www.ti.com/lit/ds/symlink/tpd6e05u06.pdf#page=28), generated with kicad-footprint-generator JST PH series connector, 502386-0370 (http://www.molex.com/pdm_docs/sd/5023860270_sd.pdf), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 2 times 1 mm² wires, reinforced insulation, conductor diameter 0.65mm, outer diameter 3.6mm, size source Multi-Contact FLEXI-E 0.15 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Soldered wire connection, for 6 times 1 mm² wires, basic insulation, conductor diameter 0.48mm, outer diameter 3.5mm, size 39.2x7mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block RND 205-00080, 4 pins, pitch 3.5mm, size 18.5x8.3mm^2, drill diamater 1.15mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 804-113, 45Degree (cable under 45degree), 24 pins, pitch 5.08mm, size 15.2x11.2mm^2, drill diamater 1.2mm, pad diameter.

New Pull Request

Labels Milestones