Y="5.2"/> Update luther's layout # Using the Precision ADSR with modifications This won't be easy; need both A1M (x3) and B10K (x1) sliders in the documentation and/or other materials provided with the Derivative Works, if and wherever such third-party notices normally appear. The contents of the indenting cones. [mm] cone_indents_height = 5.1; // Top left: clock in, speed pot_p160(); // Left side: meta-step controls // step rotary switch? Special: this needs measuring, and leaving space for well-aligned, well-printed numbers // step (manual) -- this means from the bottom //connect that to the bottom of box [right_edge, -extra_depth], // top left [left_edge, 0], // drop to axis [left_edge, -extra_depth], // top right [left_edge + height * rotate_vector_cos; points = [ [left_edge, rotate_vector_cos * rail_depth], // top left [left_edge, 0], // drop to axis [left_edge, -extra_depth], // bottom horizontal rib // h_wall(h=1.6, l=right_rib_x); // middle horizontal rib // h_wall(h=4, l=right_rib_x); // middle-bottom h rib h_wall(h=1.6, l=right_rib_x); // middle-bottom h rib pcb_holder(h=10, l=top_row-rail_clearance*2-15-thickness, th=1.15, wall_thickness=1); // Create a hole with radius: ", hole_r , " at ", hole_dist_side, hole_dist_top); echo("Putting a hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776919 12A || order number: 1766835 12A.