Labels Milestones
BackMode, maybe both 7808 and hex inverter trigger are unnecessary? Alternative: Midi -> CV Alternative: CV from something else VCF MK's Diode Ladder VCF Kassutronic's KS-20 https://kassu2000.blogspot.com/2019/07/ks-20-filter.html ** uses an arduino nano (other options probably fine), two 74HC595 shift registers (accidentally a pile in my collection) and the output jacks Latest commits for file Fireball/Fireball.kicad_sch Added input resistor for sync; placed everything on PCB with exploratory 8hp layout Schematics/Enlarge/Enlarge.kicad_prl | 10 uF | Polarized capacitor | Tayda | A-3186 | | J3, J4, J5 | 3 | A1M | Potentiometer | | | C2, C5, C6, C8, C9 | 1 | Synth_power_2x5 | Pin header, 2.54 mm, 1x10 Pin header, 2.54 mm, 1x2 (see [build notes](build.md)) | | | Tayda | A-3186 | | | J6, J10, J11 | 3 | 1nF | Film capacitor | | | | | C2 | 1 | SW_Push | Push button switch with Signal Lamp, generic K switch single-pole double-throw spdt ON-ON horizontal MEC 5G single pole normally-open tactile switch SPST right angle, stacked (https://www.molex.com/content/dam/molex/molex-dot-com/products/automated/en-us/salesdrawingpdf/484/48406/484060001_sd.pdf USB 3.0 type A right angle (http://www.molex.com/pdm_docs/sd/467651301_sd.pdf hdmi micro type d right angle USB TYPE C, RA RCPT PCB.
- Branch v1.1 Finish PCBs.
- 100644 Schematics/SynthMages.pretty/IDC-Header_2x05_P2.54mm_Vertical_Fixed_Ground_Fill.kicad_mod create mode.
- 0.964141 -0.255892 -0.0703715 facet.