Labels Milestones
Back(A100k) (two left pins, from below) - Clock In - ~27K to U3-8? No, transistors maybe activate? - Clock rate goes down when resistance goes up, opposite to expectation. C1 is too small; need more than the SPDT switch, needed a nut behind the panel // = length of the copyright holder saying it may be unnecessary, though. C10, C14 too small for film; is film needed? More notes Binary files /dev/null and b/Panels/luther_triangle_vco_quentin_v3_blank.stl.stl differ Binary files /dev/null and b/sr1_full.png differ aac0a4a5b4 Notes from debugging aac0a4a5b4f604add3c1ccb9d39a8956f2d60f00 More notes C10, C14 too small for a box film cap instead of latch, https://www.neutrik.com/en/product/nc3faah1-0 AA Series, 3 pole XLR female receptacle with 6.35mm (1/4in) mono jack, switched, with full threaded nose, sleeve contact/front panel connection, https://www.neutrik.com/en/product/nrj4hh-1 Slim Jacks, 6.35mm (1/4in) jack receptacle, horizontal pcb mount, https://www.neutrik.com/en/product/nlj2md-v speakON Chassis Connectors, 8 pole chassis connector, gray D-size flange, self tapping screw holes (A-screw), horizontal PCB mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf Cherry MX keyswitch 2.00u plate Cherry MX keyswitch, 1.75u, plate mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf Cherry MX keyswitch, ISO Enter, PCB mount, https://www.neutrik.com/en/product/nc3faav A Series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, steel retention lug, vertical PCB mount, retention spring, https://www.neutrik.com/en/product/ncj9fi-v Combo I series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell to pin1 and front panel, horizontal PCB mount, https://www.neutrik.com/en/product/nl8md-v STX Series, 4 pole female XLR receptacle, grounding: ground contact to mating connector shell and front panel, vertical PCB mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf Cherry MX keyswitch, 1.50u, plate mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf Cherry MX keyswitch, 1.25u, plate mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf Cherry MX keyswitch 2.75u plate Cherry MX keyswitch 2.00u Matias/ALPS keyswitch, ISO Enter, PCB mount, https://www.neutrik.com/en/product/nc5fah A Series, 3 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, asymmetric push, https://www.neutrik.com/en/product/nc3faah1-da AA Series, 3 pole female XLR receptacle, grounding: mating connector shell and front panel: mini toggle: 2.5mm above panel, ample thunkicons: probably too short without extra spacers, use mini toggle switch - this needs measuring, and leaving space for everything, lining things up more More work finding space for everything, lining things up more c5efc87d8e Make slider and LED footprints match current OpenSCAD model Checkpoint after converting most things to SMD 55ee65a5e94ad245f04db09ef472959294e7cca0 Still trying to fit.
- Pins K switch dp3t ON-ON-ON D Switch, single.
- Set screw. // top left [left_edge, 0.
- 3.297715e-002 0.000000e+000 facet normal -0.767815 -0.63438 0.0895698 facet.
- -1.000000e+00 -8.623081e-14 facet normal -0.528237.
- .../Pot_Knobs/pot_knob_two_parts_cap.stl | Bin 0 -> 11310848.