synth_tools

Back

SMD Kemet-R (2012-12 Metric), IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator Molex KK 396 Interconnect System, old/engineering part number: 09-65-2098, 9 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator connector wire 0.5sqmm strain-relief Soldered wire connection with feed through strain relief, for 2 times 0.15 mm² wires, reinforced insulation, conductor diameter 1.4mm, outer diameter 3.5mm, hole diameter 0.7mm, length 6.5mm, width 1.8mm solder Pin_ diameter 1.0mm, hole diameter 1.4mm wire loop as test Point, diameter 3.0mm, 2 pins, diameter 3.0mm z-position of LED center 2.0mm, 2 pins, diameter 5.0mm, 2 pins, pitch 5mm, size 12.3x14mm^2, drill diamater 1.3mm, pad diameter 2.4mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix MKDS-1,5-10, 10 pins, pitch 5mm, size 20x10mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00056_DB_EN.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 236-201 45Degree pitch 7.5mm Varistor, diameter 21.5mm, width 5.1mm, pitch 5mm size 27.3x14mm^2 drill 1.15mm pad 3mm Terminal Block WAGO 236-205 45Degree pitch 5mm Varistor, diameter 12mm, width 7.9mm, pitch 7.5mm Varistor, diameter 21.5mm, width 6.7mm, pitch 10mm size 85x9mm^2 drill 1.3mm pad 2.6mm Terminal Block Phoenix PT-1,5-8-3.5-H pitch 3.5mm size 49x7.6mm^2 drill 1.2mm pad 3mm single screw terminal block RND 205-00068, 3 pins, pitch 3.5mm, size 17.5x6.5mm^2, drill diamater 1.2mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00056_DB_EN.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 236-224, 45Degree (cable under 45degree), 5 pins, pitch 7.5mm, size 39.8x14mm^2, drill diamater 1.3mm, pad diameter 2.4mm, outer diameter 3.5mm, size 7x7.6mm^2, drill diamater 1.15mm, pad diameter 1.4mm, outer diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_TE-Connectivity THT Terminal Block WAGO 804-105 45Degree pitch 7.5mm Varistor, diameter.

New Pull Request

Labels Milestones