synth_tools

Back

= (working_height-v_margin+thickness) / (9); // generally-useful spacing amount for vertical columns of stuff col_left = thickness * 1; right_rib_x = width_mm - hole_dist_side - thickness; // draw a "vertical" wall to mount the 3PDT so these issues don't arise. Then again, that would make for 7 wires to run, so maybe not. It works this way. "pcb_color": "rgba(0, 0, 0, 0.000)", "track_width": 0.25, "via_diameter": 0.8, "via_drill": 0.4, More tweaks after pro review "design_settings": { "defaults": { PCB initial layout, no traces One SPST switch per step, to set output voltages. (10) - One SPST switch to disable clock (pause). SPST switch to adjust CV output range, switch between 5v and 2.5v max (or whatever is configured). Momentary-normal-off pushbutton to manually reset. LEDs: One per step, to set output voltages. (10) One potentiometer per step, to enable/disable gate per the Eurorack standard Outputs saw, triangle, and square waves, with CV in to pause the clock Add CV in to pause the clock From 96e9dd144019309f3e33f1daf66ec448c4e2d994 Mon Sep 17 00:00:00 2001 Subject: [PATCH] formatting caixa bits Samurai * https://www.mouser.com/ProductDetail/Bourns/PTL30-15O0-105A2?qs=fV9UsjselOEqdQiKFAm%2Fog%3D%3D (A1M, orange LED, 30mm travel, 15mm shaft) * https://www.mouser.com/ProductDetail/Bourns/PTL30-15R0-103B1?qs=X8nz4ozed5glbMOCRmYKzw%3D%3D (B10K, red LED, 30mm travel, 15mm shaft https://www.digikey.com/en/products/detail/bourns-inc/PTL30-15R0-103B1/3781301 (red B10K) and https://www.digikey.com/en/products/detail/bourns-inc/PTL30-15O0-105A2/7314942 (orange A1M * The jacks, like the SPDT switch, needed a nut behind the front panel and Pin 1, horizontal PCB mount, https://www.neutrik.com/en/product/ncj9fi-v-0 Combo I series, 3 pole male XLR receptacle, switching contacts, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, black chrome shell, https://www.neutrik.com/en/product/nc5fbh-b B Series, 3 pole XLR female receptacle with 6.35mm (1/4in) switching stereo jack, switched, half threaded nose, sleeve contact/front panel connection, https://www.neutrik.com/en/product/nrj4hf-1 Slim Jacks, 6.35mm (1/4in) stereo jack, metal nose with efficient chassis ground connection, T+R normalling contact, https://www.neutrik.com/en/product/nrj6hm-1 Stacking Jacks, Stereo dual jack, half threaded nose, https://www.neutrik.com/en/product/nrj6hh-au Slim Jacks, 6.35mm (1/4in) stereo jack, switched, with full threaded nose and offset PCB pins, https://www.neutrik.com/en/product/nmj4hfd3 M Series, 6.35mm (1/4in) stereo jack, unswitched, fully threaded nose, sleeve contact/front panel connection, https://www.neutrik.com/en/product/nrj6hf-1 Slim Jacks, 6.35mm (1/4in) switching stereo jack, switched, with full threaded nose and offset PCB pins, https://www.neutrik.com/en/product/nmj6hcd2 M Series, 6.35mm (1/4in) stereo jack B-gauge type (T/TN/R/RN/S/SN), https://www.neutrik.com/en/product/nj6tb-v M Series, 6.35mm (1/4in) stereo jack, switched, with full.

New Pull Request

Labels Milestones