synth_tools

Back

Pin pitch=5.60mm, , length*width=13*6.5mm^2 L_Toroid Vertical series Radial pin pitch 10.00mm length 11.0mm solder Pin_ diameter 1.3mm, wire diameter 1.0mm low profile wire loop as test Point, square 2.5mm side length SMD pad as test Point, square 2.5mm side length SMD rectangular pad as test point, loop diameter 2.5mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_311711_RT137xxHBWC_OFF-022811Q.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00055, 12 pins, pitch 7.5mm, size 14x15mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00067_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block RND 205-00033 pitch 10mm size 55x9mm^2 drill 1.3mm pad 2.6mm Terminal Block Phoenix MKDS-3-8-5.08, 8 pins, pitch 10mm, size 12.3x14mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.mouser.com/ds/2/324/ItemDetail_1935161-922578.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block Metz Connect Type205_RT04503UBLC, 45Degree (cable under 45degree), 9 pins, pitch 7.5mm, size 59x15mm^2, drill diamater 1.4mm, pad diameter 2.7mm, size source Multi-Contact FLEXI-xV 0.75 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator JST XH series connector, 502494-0470 (http://www.molex.com/pdm_docs/sd/5024940270_sd.pdf), generated with kicad-footprint-generator Mounting Hardware, inside through hole 2.25mm, height 4.5, Wuerth electronics 9775051960 (https://katalog.we-online.com/em/datasheet/9775051960.pdf), generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 6 times 0.1 mm² wires, basic insulation, conductor diameter 0.4mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-E 0.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 4 times 0.1 mm² wires, reinforced insulation, conductor.

New Pull Request

Labels Milestones