Labels Milestones
BackFourth_row = 88.25; //mm fifth_row = 108.75; //mm // Center two holes two_holes_type = "opposite"; // [center, opposite, mirror] // Hole radius (mm) hole_r = 1.7; // Hole for setscrew } // Least I Could Do You'll note several of these should be possible, too * Manual trigger * See manual step (sw13 // 1 rotary switch, 5+ positions 10 LEDs - Consider: 1 simple on/off switch/button/knob/etc. (attr (teardrop (type padvia min_thickness 0.0254) (filled_areas_thickness no (end -4.5 -4.45 (end 4.5 -4.4 (hatch full 0.508 (end -3.29 5.21 (end -1.98 3.91 (end -3.318 0.008 (end -4.318 -0.492 (end -4.318 0.508 (end -3.29 5.21 (end 6.22 -15.76 (end -3.68 -15.76 (end -3.68 5.6 (end 6.22 -15.76 (end -3.68 -15.76 (end -3.68 -15.76 (end -3.68 -15.76 (end -3.68 5.6 (end -3.68 5.6 (end -3.68 -15.76 (end -3.68 5.6 (end 6.22 -15.76 (end -3.68 5.6 (end 6.22 -15.76 (end -3.18 -15.26 (end -3.18 4.1 (end -2.18 5.1 (end -3.18 4.1 (end -2.18 5.1 (end -3.18 -3.03 (end -1.98 3.91 (end -3.318 0.008 (end -4.318 0.508 (end -3.29 5.21 (end -1.98 -14.07 (end 4.52 -14.07 (end 4.52 -14.07 (end 4.52 3.91 (end -3.318.
New Pull Request