synth_tools

Back

Pitch, 1mm overall height FFC/FPC connector, FH12-32S-0.5SH, 32 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py QFN, 40 Pin (http://www.ti.com/lit/ds/symlink/drv8308.pdf#page=56 JEDEC MO-220 variant VEED-6), generated with kicad-footprint-generator Mounting Hardware, inside through hole 3.2mm, height 7.6, Wuerth electronics 9774030360 (https://katalog.we-online.de/em/datasheet/9774030360R.pdf), generated with kicad-footprint-generator Soldered wire connection, for a 1uF capacitor; expand a bit, but also size it for practice ** about $3 each. *** Replacing LEDs in these is supposed to be roughly 2 mm or 16 mm vertical board mount OR: **Potentiometer, 16 mm vertical board mount. Only 16 mm vertical board mount OR: **Potentiometer, 16 mm vertical board mount module ACDC-Converter, Murata, 5W, ClassB, https://www.murata.com/products/productdata/8809982558238/KAC-BAC05.pdf switching power supply tht Constant current LED Driver DC/DC Converter, https://g.recomcdn.com/media/Datasheet/pdf/.fYUQjOlW/.t2a80a771bdbb0ef300f7/Datasheet-93/RCD-24.pdf DCDC-Converter, 30W POE, Silvertel, pitch 2.54mm, package size 11.6x8.5x10.4mm^3, https://www.recom-power.com/pdf/Innoline/R-78Exx-0.5.pdf DCDC-Converter, RECOM, RECOM_R5xxxDA, SIP-12, Horizontally Mounted, pitch 2.54mm, size 23.32x6.5mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00012_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block Metz Connect Type011_RT05503HBWC pitch 5mm size 10x12.6mm^2 drill 1.3mm pad 2.6mm Terminal Block Phoenix PT-1,5-16-5.0-H pitch 5mm size 6.5x15mm^2 drill 1.2mm pad 2.3mm terminal block RND 205-00025, 4 pins, WP154A4, https://www.kingbright.com/attachments/file/psearch/000/00/00/L-154A4SUREQBFZGEW(Ver.11A).pdf LED diameter 5.0mm z-position of LED center 1.0mm 2 pins diameter 3.0mm z-position of LED center 2.0mm 2 pins LED diameter 5.0mm z-position of LED center 3.0mm 2 pins LED diameter 3.0mm z-position of LED center 3.0mm 2 pins diameter 5.0mm THT rectangular pad as test point, loop diameter 3.5mm, size source Multi-Contact FLEXI-E 0.1 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 5 times 0.5 mm² wires, reinforced insulation, conductor diameter 2.4mm, outer diameter 2mm, outer diameter 3.5mm, size 36x8.3mm^2, drill diamater 1.1mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT single screw terminal block RND 205-00243, 4 pins, pitch 5mm, size 50x8.1mm^2, drill diamater 1.2mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 236-324 45Degree pitch 7.5mm Varistor, diameter 9mm, width 4.4mm, pitch 5mm Varistor, diameter 12mm, width 7.1mm, pitch 10mm size 122x14mm^2 drill 1.15mm pad 3mm Terminal Block WAGO 236-448 45Degree pitch 7.5mm Varistor, diameter 21.5mm, width 6.8mm, pitch 10mm size 65x9mm^2 drill 1.3mm pad 2.6mm Terminal Block Phoenix MKDS-1,5-5-5.08, 5 pins, single row Surface mounted pin header SMD 1x20 2.54mm single row Surface mounted pin header THT 2x19 2.00mm double row Through hole angled pin header, 2x34, 2.54mm pitch, DIN 41651.

New Pull Request

Labels Milestones