synth_tools

Back

Size 122x15mm^2 drill 1.2mm pad 3mm Terminal Block Phoenix MPT-0,5-3-2.54, 3 pins, pitch 10.2mm, size 66x8.3mm^2, drill diamater 1.4mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00276_DB_EN.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block Metz Connect Type059_RT06306HBWC, 6 pins, pitch 5.08mm, size 76.2x9.8mm^2, drill diamater 1.4mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00298_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block RND 205-00249, 10 pins, dual row female, vertical entry, strain relief clip Harwin LTek Connector, 2 pins, pitch 10mm, size 35x9mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00078_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix MKDS-1,5-6-5.08 pitch 5.08mm length 8.9mm diameter 3.7mm Diode, 5W series, Axial, Horizontal, pin pitch=15.24mm, , length*diameter=9.53*5.21mm^2, , http://www.diodes.com/_files/packages/DO-201.pdf Diode DO-201 series Axial Horizontal pin pitch 10.00mm diameter 18mm Inductor, Radial series, Radial, pin pitch=10.00mm, , length*width=13*4mm^2, Capacitor, http://www.wima.com/EN/WIMA_FKS_3.pdf, http://www.wima.com/EN/WIMA_MKS_4.pdf C Rect series Radial pin pitch 5.08mm size 61x10.6mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00055, 12 pins, pitch 5.08mm, size 25.4x8.45mm^2, drill diamater 1.2mm, pad diameter 2.6mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_311751_RT027xxHBLC_OFF-022814U.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 236-106, 45Degree (cable under 45degree), 3 pins, pitch 9.52mm, size 28.6x12.5mm^2, drill diamater 1.3mm, pad diameter 3mm, size source Multi-Contact FLEXI-E 1.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Hirose DF13 through hole, DF11-26DP-2DSA, 13 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py WQFN, 16 Pin (https://ww1.microchip.com/downloads/en/DeviceDoc/16L_VQFN-WFS_3x3mm_4MX_C04-00508a.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py 16-Lead Ultra Thin Quad Flatpack (PT) - 7x7x1.0 mm Body [TSSOP] with exposed pad 8-Lead Plastic DFN (3mm x 2mm) (see Linear Technology DFN_16_05-08-1706.pdf DHD Package; 18-Lead Plastic DFN (3mm x 3mm); Pitch 0.4mm; EP 1.7x1.54mm; for InvenSense motion sensors; Mask removed below exposed pad; keepout area marked (Package see: https://store.invensense.com/datasheets/invensense/MPU-6050_DataSheet_V3%204.pdf; See also https://www.invensense.com/wp-content/uploads/2015/02/InvenSense-MEMS-Handling.pdf 24-Lead Plastic QFN (3mm x 2mm) (see Linear Technology DFN_6_05-08-1703.pdf 6-Lead Plastic DFN (4mm x 3mm) (see Linear Technology DFN_32_05-08-1734.pdf DFN44 8.9x5, 0.4P; CASE 506BU-01 (see ON Semiconductor 505AB.PDF DFN22 6*5*0.9 MM, 0.5 P; CASE 506AF\xe2\x88\x9201 (see ON Semiconductor 932BH.PDF TQFP, 64 Pin (https://www.infineon.com/dgdl/Infineon-MA12040-DS-v01_00-EN.pdf?fileId=5546d46264a8de7e0164b7467a3d617c#page=81), generated with kicad-footprint-generator JST XH vertical boss JST XA vertical JST ZE series connector, B8P-VH (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py 32-lead plastic TSOP; Type II TSOP-II, 44 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/39935c.pdf#page=152), generated with kicad-footprint-generator connector Hirose DF13 through hole, DF11-8DP-2DSA, 4 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-112-02-xxx-DV, 12 Pins per row (https://cdn.harwin.com/pdfs/M20-890.pdf), generated with kicad-footprint-generator Connector Phoenix Contact, SPT.

New Pull Request

Labels Milestones