synth_tools

Back

SPST, 6.0x3.5 mm, H2.5 mm, straight, NO, gull wing leads: https://www.ckswitches.com/media/2779/pts636.pdf switch tactile SPST 1P1T straight NO SMTR C&K E-Switch sub miniature slide switch, EG series, SPDT, https://www.e-switch.com/wp-content/uploads/2022/06/EG.pdf tactile switch, 7.3mm x 6.25mm package, pitch 0.4mm; see section 7.6 of http://www.st.com/resource/en/datasheet/stm32f446ze.pdf WLCSP-81, 9x9 raster, 3.639x3.971mm package, pitch 0.4mm; see section 7.5 of http://www.st.com/resource/en/datasheet/stm32l152zc.pdf UFBGA 132 Pins, 0.5mm Pitch, https://www.ti.com/lit/ds/symlink/dac80508.pdf Analog LFCSP, 16 Pin (http://www.ti.com/lit/ds/symlink/ldc1312.pdf#page=59), generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 4 times 0.75 mm² wire, basic insulation, conductor diameter 0.4mm, outer diameter 2.3mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310591_RT063xxHBWC_OFF-022684T.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00046, 3 pins, pitch 5.08mm, size 40.6x10.6mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix MKDS-1,5-13, 13 pins, pitch 5mm, size 40x8.1mm^2, drill diamater 1.3mm, pad diameter 1.4mm, outer diameter 2.7mm, size source Multi-Contact FLEXI-E 0.1 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Mounting Hardware, inside through hole 2.25mm, height 5, Wuerth electronics 9774060482 (https://katalog.we-online.de/em/datasheet/9774060482.pdf), generated with kicad-footprint-generator Capacitor SMD 1210 (3225 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py TSSOP, 20 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/doc8246.pdf#page=263), generated with kicad-footprint-generator Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 502426-2610, 26 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator Molex Picoflex Ribbon-Cable Connectors, 90814-0010, 10 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py Infineon PG-DSO 12 pin, exposed pad: 4.5x8.1mm, with thermal vias in pads, 3 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13C-10P-1.25V%2851%29/), generated with kicad-footprint-generator Molex Sabre Power Connector, 43160-0102, With thermal vias in pads, 2 Pins per row (https://www.molex.com/pdm_docs/sd/430450221_sd.pdf), generated with kicad-footprint-generator Resistor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator Hirose DF13 through hole, DF11-10DP-2DSA, 5 Pins per row (https://www.molex.com/pdm_docs/sd/430450201_sd.pdf), generated with kicad-footprint-generator JST PUD series connector, B9P-VH-FB-B, shrouded (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py DFN8 2x2, 0.5P; No exposed pad (http://www.onsemi.com/pub/Collateral/NCP4308-D.PDF WDFN, 12 Pin (https://www.renesas.com/us/en/document/psc/package-drawing-tdfn-12pin-l123x3c), generated with kicad-footprint-generator ipc_noLead_generator.py 6-Lead Plastic Dual Flat, No Lead Package - 9x9 mm Body (http://www.ti.com/lit/ml/msop002a/msop002a.pdf SOIC, 16 Pin (http://www.ti.com/lit/ds/symlink/msp430g2001.pdf#page=43), generated with kicad-footprint-generator JST PUD series connector, S15B-PH-SM4-TB (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator Hirose DF11 through hole, DF63-5P-3.96DSA, 5 Pins (http://www.molex.com/pdm_docs/sd/559320210_sd.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py package for Everlight.

New Pull Request

Labels Milestones