synth_tools

Back

Entry connector harwin ltek M80 Harwin LTek Connector, 14 pins, pitch 5mm, size 80x9.8mm^2, drill diamater 1.3mm, pad diameter 2.1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times 1.5 mm² wires, basic insulation, conductor diameter 1.4mm, length 8.5mm, width 2.8mm, e.g. Ettinger 13.13.865, https://katalog.ettinger.de/#p=434 solder Pin_ diameter 1.3mm, wire diameter 0.5mm test point SMD pad SMD pad as test Point, diameter 4.0mm Plated Hole as test Point, square 2.5mm side length, hole diameter 0.7mm, wire diameter 1.0mm THT pad as test Point, diameter 1.0mm (press fit), length 10.0mm solder Pin_ with flat fork, hole diameter 1.4mm wire loop as test Point, square 1.5mm side length, hole diameter 0.7mm, length 6.5mm, width 1.8mm solder Pin_ with flat fork solder Pin_ with flat fork, hole diameter 1.0mm wire loop as test point, loop diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT single screw terminal block RND 205-00302, 6 pins, pitch 5.08mm, size 15.2x11.2mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.4uconnector.com/online/object/4udrawing/10693.pdf, script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 236-506, 45Degree (cable under 45degree), 24 pins, pitch 10mm, size 12.3x14mm^2, drill diamater 1.2mm, pad diameter 3mm, see , script-generated with , script-generated with , script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block 4Ucon ItemNo. 20001 pitch 3.5mm size 11.2x7mm^2 drill 1.2mm pad 2.4mm Terminal Block WAGO 236-109, 45Degree (cable under 45degree), 9 pins, pitch 7.5mm, size 29x15mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 804-106, 45Degree (cable under 45degree), 1 pins, pitch 5mm, size 45x9mm^2, drill diamater 1.2mm, pad diameter 3mm, see , script-generated.

New Pull Request

Labels Milestones