Labels Milestones
BackA Combo A series, 3 pole XLR female receptacle with 6.35mm (1/4in) stereo jack, vertical PCB mount, retention spring instead of latch, https://www.neutrik.com/en/product/nc3fah1-0 A Series, 3 pole female XLR receptacle, grounding: mating connector shell and front panel, lateral right PCB mount, https://www.neutrik.com/en/product/nc4mafh-ph A Series, 5 pole female XLR receptacle, grounding: ground contact to mating connector shell and front panel, horizontal PCB mount, https://www.neutrik.com/en/product/nc3maah-1 AA Series, 3 pole male XLR receptacle, grounding: mating connector shell to pin1 and front panel. - Current design uses six IDC 2×8 connectors with 4 unused pins if supplying power, but not to front panel components version
main VCA/Panels/dual_vca.scad 393 lines $fn=FN; footprint_depth = .25; //non-printing, barely-visible outline of component footprints printer_z_fix = 0.5; // this is far simpler than this.- R26 D36/R47 too close Testing before powering.
- 0.629688 0.115285 facet normal.
- Header, 2x27, 1.27mm pitch, 4.4mm socket length.