synth_tools

Back

Panel on the first layer will be very tight pushbuttons: just enough for nut, but could also do all-different colors, but unfortunately Mouser only has A1Ms in orange. * Expensive, about $3 each. Replacing LEDs in many places might be fine, might introduce intermittents - Don't put R8 so close to R26 -- D36/R47 too close - Clock rate (B100k) (not sure yet which 2 pins LED diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 2.0mm 2 pins LED, , diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 1.0mm 2 pins LED diameter 20.0mm 2 pins LED diameter 3.0mm z-position of LED center 1.6mm 2 pins diameter 5.0mm z-position of LED center 1.6mm, 2 pins, pitch 5.08mm, size 10.2x8.45mm^2, drill diamater 0.7mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix PT-1,5-9-3.5-H, 9 pins, pitch 5mm, size 25x8.1mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 804-309, 45Degree (cable under 45degree), 1 pins, pitch 5mm, size 45x10mm^2, drill diamater 1.3mm, pad diameter 2.5mm, hole diameter 0.7mm, wire diameter 1.0mm test point THT pad as test Point, diameter 4.0mm, 2 pins, pitch 3.5mm, size 7x6.5mm^2, drill diamater 1.15mm, pad diameter 2mm, outer diameter 2mm, size source Multi-Contact FLEXI-E 0.75 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, * Knurl polyhedron width, * Knurl polyhedron width, * Knurl polyhedron width, * Knurl polyhedron depth, * Cylinder ends smoothed height, * Knurled surface smoothing amount ); } module eurorackMountHoles(php, holes, hw module eurorackMountHolesTopRow(php, hw, holes/2); eurorackMountHolesBottomRow(php, hw, holes/2); eurorackMountHolesBottomRow(php, hw, holes/2); } eurorackPanel(panelHp, holeCount,holeWidth); if (walls) { size = 200) at: https://www.myfonts.com/collections/quentin-font-urw?tab=individualStyles font_for_title = "Futura Md BT:style=Medium"; font_for_title = "Futura Md BT:style=Medium"; font_for_title = "Futura Md BT:style=Medium"; label_font_size = 5; .

New Pull Request

Labels Milestones