Labels Milestones
Back501331-1507 (http://www.molex.com/pdm_docs/sd/5013310207_sd.pdf), generated with kicad-footprint-generator Harwin Male Horizontal Surface Mount Double Row 2.54mm (0.1 inch) Pitch PCB Connector, M20-7810645, 6 Pins (https://www.molex.com/pdm_docs/sd/009652028_sd.pdf), generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 5 times 0.75 mm² wire, reinforced insulation, conductor diameter 2.4mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix PTSM-0,5-7-2.5-V-THR vertical pitch 5mm size 22.3x14mm^2 drill 1.15mm pad 3mm Terminal Block Phoenix PT-1,5-9-3.5-H, 9 pins, pitch 5.08mm, size 25.4x10.6mm^2, drill diamater 1.2mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block Metz Connect Type205_RT04505UBLC, 45Degree (cable under 45degree), 5 pins, pitch 5.08mm, revamped version of bornier2 simple 3-pin terminal block, pitch 5.08mm, size 35.6x10.6mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.metz-connect.com/ru/system/files/productfiles/Data_sheet_310941_RT035xxHBLU_OFF-022742T.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 236-409, 45Degree (cable under 45degree), 1 pins, pitch 5.08mm, revamped version of NL4MD-V with 8 vertical PCB mount, https://www.neutrik.com/en/product/nc3mah A Series, 4 pole chassis connector, grey D-size flange, countersunk thru holes, vertical PCB mount, retention spring instead of latch, https://www.neutrik.com/en/product/nc3fahl-0 A Series, 5 pole male XLR receptacle, grounding: without ground/shell contact, horizontal PCB mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf Cherry MX keyswitch 1.75u Matias/ALPS keyswitch, 1.75u, plate mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf Cherry MX keyswitch, 1.00u, PCB mount, retention spring, https://www.neutrik.com/en/product/ncj10fi-h Combo I series, 3 pole XLR female receptacle with 6.35mm (1/4in) stereo jack, switched, fully threaded nose, https://www.neutrik.com/en/product/nrj6hf-au Slim Jacks, 6.35mm (1/4in) mono jack, switched, with full threaded nose, https://www.neutrik.com/en/product/nrj6hf Slim Jacks, 6.35mm (1/4in) mono jack (T/S), https://www.neutrik.com/en/product/nj2fd-v 6.35mm (1/4 in) Vertical Jack, Non-switching stereo jack without switching contact, horizontal PCB mount, retention spring instead of latch, https://www.neutrik.com/en/product/nc3fahl1-0 A Series, 3 pole female XLR receptacle, switching contacts, grounding: separate ground contact to mating connector shell and front panel, lateral left PCB mount, retention spring, https://www.neutrik.com/en/product/ncj5fi-h Combo I series, 3 pole male XLR receptacle, grounding.
New Pull Request