synth_tools

Back

LongPads 28-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils), Socket 22-lead though-hole mounted DIP package, row spacing 15.24 mm (600 mils), LongPads 6-lead though-hole mounted DIP package, row spacing 15.24 mm (600 mils), LongPads 5-lead though-hole mounted DIP package, row spacing 15.24 mm (600 mils 40-lead surface-mounted (SMD) DIP package, row spacing 10.16 mm (400 mils), LongPads 12-lead though-hole mounted DIP package, row spacing 9.53 mm (375 mils), Clearance8mm 18-lead surface-mounted (SMD) DIP package, row spacing 7.62 mm (300 mils), body size 10.8x29.5mm 11x-dip-switch SPST , Slide, row spacing 10.16 mm (400 mils), SMDSocket, LongPads 22-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils), Socket THT DIP DIL PDIP 2.54mm 7.62mm 300mil Three phase, Bridge, Rectifier, https://www.comchiptech.com/admin/files/product/SC35VB80S-G%20Thru506369.%20SC35VB160S-G%20RevB.pdf 4-lead dip package with 1.27mm pin pitch, compatible with SOIC-8, 3.9x4.9mm² body, exposed pad, thermal vias, http://www.ti.com/lit/ds/symlink/drv8870.pdf 20-Pin Thermally Enhanced Thin Shrink Small Outline (SO), see http://datasheet.octopart.com/OPIA403BTRE-Optek-datasheet-5328560.pdf 4-Lead Plastic Small Outline (SO), see https://www.elpro.org/de/index.php?controller=attachment&id_attachment=339 SO, 4 Pin (https://www.onsemi.com/pub/Collateral/MDB8S-D.PDF#page=4), generated with kicad-footprint-generator connector Molex PicoBlade Connector System, 43045-2000 (alternative finishes: 43045-202x), 10 Pins (http://www.molex.com/pdm_docs/sd/903250004_sd.pdf), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-112-02-xxx-DV-A, 12 Pins per row (http://www.molex.com/pdm_docs/sd/530480210_sd.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py 4-Lead Plastic Small Outline Package (MS) [MSOP], variant of MSOP-16 (see http://cds.linear.com/docs/en/datasheet/3630fd.pdf 12-Lead Plastic DFN (4mm x 4mm); Pitch 0.5mm; EP 2.7x2.6mm; for InvenSense motion sensors; Mask removed below exposed pad; keepout area marked (Package see: https://store.invensense.com/datasheets/invensense/MPU9250REV1.0.pdf; See also https://www.invensense.com/wp-content/uploads/2015/02/InvenSense-MEMS-Handling.pdf 24-Lead Plastic QFN (4mm x 3mm) (see Linear Technology 05081955_0_DHC18.pdf DHD Package; 16-Lead Plastic.

New Pull Request

Labels Milestones