Labels Milestones
BackMm, 1x7 | | | U3 | 1 | 2_pin_Molex_header | 2 pin Molex header 2.54 mm spacing R23, R24, R25, R27 Switch, triple pole double throw, separate symbols | | R30 | 1 | 2_pin_Molex_connector | KK254 Molex header 2.54 mm spacing | | | | | | | R3, R7 | 2 pin Molex header 2.54 mm spacing | | | U1 | 1 Hardware/PCB/precadsr/sym-lib-table | 3 | A1M | Potentiometer | | | J2 | 1 | 10 nF | Unpolarized capacitor | | R109, R111, R113 | 3 | A1M | Potentiometer | | J2 | 1 | 10nF | Unpolarized capacitor | | | D 2 pin Molex header 2.54 mm spacing | Tayda | A-826 | | | | | | | | | D6, D7 | 2 pin Molex connector 2.54 mm spacing | Tayda | A-159 | | | J7 | 1 | SW_Push | Push button switch, normally closed, generic, four pins D Momentary Switch, dual pole double throw K switch SPST angled PTS645VL83-2 LFS C&K Button tactile switch SPST angled PTS645VL58-2 LFS C&K Button tactile switch SPST angled PTS645VL83-2 LFS C&K Button tactile switch with Signal Lamp, generic K switch single-pole double-throw spdt ON-ON illuminated red green D Push button switch with ground pin http://www.ckswitches.com/media/1479/kmr2.pdf tactile push button, 6x6mm e.g. PHAP33xx series, height=8mm tactile push button, 6x6mm e.g. PHAP33xx series, height=8mm tactile push button, 6x6mm e.g. PHAP33xx series, height=4.3mm tactile push button, 6x6mm e.g. PHAP33xx series, height=9.5mm tact sw push 6mm smd CK components KMR2 tactile switch SPST angled PTS645VL83-2.
New Pull Request