Labels Milestones
BackRND 205-00295, 10 pins, pitch 5mm, size 122x14mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/2138224.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon THT Terminal Block Phoenix PTSM-0,5-8-2.5-V-THR, vertical (cable from top), 6 pins, pitch 5mm, size 10x12.6mm^2, drill diamater 1.3mm, pad diameter 2.2mm, see http://www.mouser.com/ds/2/324/ItemDetail_1725672-916605.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block Metz Connect Type086_RT03403HBLC pitch 3.81mm size 11.3x7.3mm^2 drill 0.7mm pad 1.4mm terminal block Metz Connect Type205_RT04504UBLC, 45Degree (cable under 45degree), 16 pins, pitch 5mm, size 60x9mm^2, drill diamater 1.4mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00276_DB_EN.pdf, script-generated with , script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block TE 282834-4 pitch 2.54mm DCDC-Converter, RECOM, RECOM_R5xxxDA, SIP-12, Horizontally Mounted, pitch 2.54mm, package size 11.5x8.5x17.5mm^3, https://www.recom-power.com/pdf/Innoline/R-78HBxx-0.5_L.pdf DCDC-Converter, RECOM, RECOM_R-78HB-0.5L, SIP-3, Horizontally Mounted, pitch 2.54mm, package size 32.2x9.1x15mm^3, https://www.recom-power.com/pdf/Innoline/R-5xxxPA_DA.pdf RPA60-FW 60W Isolated DC to DC Converters dc-dc recom buck sip-4 pitch 2.54mm size 10.6x6.2mm^2 drill 1.1mm pad 2.2mm Terminal Block WAGO 236-203, 45Degree (cable under 45degree), 24 pins, pitch 10mm, size 12.3x14mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00244, 5 pins, pitch 7.5mm, size 75x10.3mm^2, drill diamater 1.2mm, pad diameter 1.4mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-E 0.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator JST EH top entry Molex MicroClasp Wire-to-Board System, 55932-0710, with PCB trace layout created pull request synth_mages/MK_VCO#1 cfb5bfb128 Finish schematic, add PDF' (#2) from schematic into main Merge pull request synth_mages/MK_SEQ#2 Notes about component heights, swapping rotary and toggle switches Port in fixes from v1.1 Checkpoint after tweaking footprints some more, starting over at 14hp PCB initial layout, no traces "solder_mask_clearance": 0.0, PCB initial layout, no traces PCB initial layout, no traces One SPST switch per step, to set output voltages. (10) - One SPST switch to disable clock (pause). SPST switch to disable reset (run once). - Momentary-normal-off pushbutton to manually reset. - One multi-pole rotary switch - this needs a _big_ knob, these are actually 2p6t, which means only six different step counts are available until the replacement arrives Wiring SW15 (once/stop) and cascade out is easier done via skywiring; only one cross-board wire that shouldn't be over about 20mm in diameter at the first if(preg_match("@.*(