synth_tools

Back

Horizontal MEC 5G single pole normally-open illuminated tactile switch Wurth Wuerth Ultraminiature Surface Mount Single Row 2.54mm (0.1 inch) Pitch PCB Connector, M20-7811045, 10 Pins (http://www.molex.com/pdm_docs/sd/559350530_sd.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py USON, 6 Pin (https://www.onsemi.com/pdf/datasheet/ncp349-d.pdf#page=12), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-110-02-xxx-DV, 10 Pins (http://www.molex.com/pdm_docs/sd/022272021_sd.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py QFN, 64 Pin (https://datasheet.lcsc.com/szlcsc/Realtek-Semicon-RTL8211EG-VB-CG_C69264.pdf#page=77), generated with kicad-footprint-generator Mounting Hardware, inside through hole M3, height 2.5, Wuerth electronics 97730506334 (https://katalog.we-online.com/em/datasheet/97730506334.pdf), generated with kicad-footprint-generator Hirose DF13 through hole, DF13-04P-1.25DS, 4 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with StandardBox.py) (http://www.altechcorp.com/PDFS/PCBMETRC.PDF Altech AK300 serie terminal block Metz Connect Type175_RT02706HBLC, 6 pins, http://www.ti.com/lit/ds/symlink/tps737.pdf module CMS SOT223 8 pins, pitch 5mm, size 47.3x14mm^2, drill diamater 1.2mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00067_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 236-203, 45Degree (cable under 45degree), 3 pins, pitch 5mm, size 30x12.6mm^2, drill diamater 1.2mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block 4Ucon ItemNo. 10704 vertical pitch 3.5mm size 49x7.6mm^2 drill 1.2mm pad 2.4mm Terminal Block Phoenix MPT-0,5-5-2.54, 5 pins, pitch 10mm, size 52.3x14mm^2, drill diamater 1.3mm, pad diameter 2.5mm.

New Pull Request

Labels Milestones