Labels Milestones
BackREADME.md updated C14 footprint, traces, groundplane updated C14 footprint, traces, groundplane updated C5 footprint & tracing; schematic annotation update with full threaded nose and straight PCB pins, https://www.neutrik.com/en/product/nmj4hcd2 M Series, 6.35mm (1/4in) stereo jack, horizontal PCB mount, https://www.neutrik.com/en/product/nc3fahr2 A Series, 3 pole male XLR receptacle, grounding: ground contact to mating connector shell and front panel, steel retention lug, horizontal PCB mount, https://www.neutrik.com/en/product/nc3mbhr B Series, 3 pole male XLR receptacle, grounding: separate ground contact to mating connector shell to pin1 and front panel: mini toggle: 2.5mm above panel, ample thunkicons: probably too tight; could work with printed spacers mini toggle: 4mm above panel, ample thunkicons: probably too short without extra spacers, use mini toggle pushbuttons: ample space above 11.75mm (existing 1p12t rotaries, use 11.25mm holes to PCB edge 7.4799999999999995mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf 15-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, male, pitch 2.77x2.84mm, pin-PCB-offset 9.4mm, see http://docs-europe.electrocomponents.com/webdocs/1585/0900766b81585df2.pdf 44-pin D-Sub connector, solder-cups edge-mounted, female, x-pin-pitch 2.77mm, distance of mounting holes to 5mm + unplated, and revises jack footprint 16c50fa0a8 Add pulldown resistors for reset debounce cap; formatting col_left = h_margin; bottom_row .
New Pull Request