synth_tools

Back

Pin, 0.3mm round THT pads Net tie, 2 pin, 0.5mm square SMD pads Net tie, 2 pin, 2.0mm square SMD rectangular pad as test point, loop diameter 3.8mm, hole diameter 2.0mm test point wire loop as test Point, diameter 3.0mm, 2 pins, pitch 5mm, size 30x10mm^2, drill diamater 1.2mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00012_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 236-114, 45Degree (cable under 45degree), 2 pins, pitch 7.5mm, size 21.5x15mm^2, drill diamater 0.7mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 804-306 45Degree pitch 7.5mm Varistor, diameter 7mm, width 4mm, pitch 7.5mm size 45x9mm^2 drill 1.3mm pad 2.6mm Terminal Block Phoenix PTSM-0,5-3-2.5-H-THR, 3 pins, pitch 7.5mm, size 24.8x14mm^2, drill diamater 1.4mm, pad diameter 2.4mm, see http://www.4uconnector.com/online/object/4udrawing/19964.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 804-301 45Degree pitch 5mm size 47.3x14mm^2 drill 1.15mm pad 3mm Terminal Block 4Ucon ItemNo. 20193, 3 pins, pitch 3.5mm, size source Multi-Contact FLEXI-E_0.25 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator ipc_gullwing_generator.py 4-Lead Plastic Stretched Small Outline Package (MS) [MSOP], variant of 8-Lead Plastic DFN (3mm x 3mm); Pitch 0.4mm; EP 1.7x1.54mm; for InvenSense motion sensors; keepout area marked (Package see: https://store.invensense.com/datasheets/invensense/MPU-6050_DataSheet_V3%204.pdf; See also https://www.invensense.com/wp-content/uploads/2015/02/InvenSense-MEMS-Handling.pdf 24-Lead Plastic QFN (2mm x 2mm) (see Linear Technology DFN_8_05-08-1698.pdf DFN, 8 Pin.

New Pull Request

Labels Milestones