Labels Milestones
BackBottom-mount, SMD, right-angle (http://en.connfly.com/static/upload/file/pdf/DS1104-01.pdf USB 3.0 3.1 3.2 4.0 Type-C receptable, through-hole mount, SMD, right-angle (http://en.connfly.com/static/upload/file/pdf/DS1104-01.pdf USB 3.0 type A Plug, Horizontal, http://cnctech.us/pdfs/1001-011-01101.pdf USB-A receptacle horizontal through-hole USB type A, right angle tactile switch Omron B3F right angle Surface-mount DC Barrel Jack 2mm or 2.5mm center pin, https://www.kycon.com/Pub_Eng_Draw/KLDX-0202-AC%20&%20BC.pdf power jack Confirm barrel power jack works physically for male connector from wall wart. - Consider incorporating additional LED indicators for use as tremolo - Manual offset knob 63579cf959 Add notes about wiring SW15 cross-board Add design rules for jlcpcb Add design rules for jlcpcb 4ee6887723 Add some perfboard sections, power headers, teardrops checkpoint before trying to implement chaining sandwich Move LED resistors next to transistors to save on panel wires 88bf85725f Update to 7.0, slider footprint Add footprint items for panel holes; separate panel and pcb into different files Fireball/Fireball.kicad_pcb | 8194 Fireball/Fireball_panel.kicad_pro | 6 Latest commits for file Panels/FireballSpell.png Add panels Add panels Panels/FireballSpell.png | Bin 0 -> 509084 bytes // Width of module (HP) width = 12; hole_vdist = 44.5; hole_radius = hole_diameter / 2; hole_vert = (board_height - hole_vdist) / 2; hole_vert = (board_height - hole_vdist) / 2 + hole_diameter + hole_margin*2; cutout_width = board_width - (side_margin * 2); hole_horiz = (board_width - hole_hdist) / 2; hole_vert = (board_height - hole_vdist) / 2 + (enable_stem ? Stem_height : 0) + knob_height - cone_indents_cutdepth; for (z .
- HC-51 http://www.crovencrystals.com/croven_pdf/HC-51_Crystal_Holder_Rev_00.pdf Crystal THT DS26 6.0mm length.
- Var DD-1 https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator.