synth_tools

Back

Size 75x9.8mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 236-509, 45Degree (cable under 45degree), 48 pins, pitch 10mm, size 75x9mm^2, drill diamater 1.1mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/2138224.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon THT Terminal Block Philmore , 3 pins, pitch 5mm, size 15x10.5mm^2, drill diamater 1.15mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 236-106, 45Degree (cable under 45degree), 8 pins, https://www.diodes.com/assets/Datasheets/ZXSBMR16PT8.pdf 8-pin SOT-383FL package, http://www.onsemi.com/pub_link/Collateral/ENA2267-D.PDF SOT-543 4 lead surface package SOT 963 6 pins package 1x0.8mm pitch 0.35mm SOT-1123 small outline package; 10 leads; body width 3.9 mm; lead pitch 0.635; (see http://cds.linear.com/docs/en/datasheet/38901fb.pdf 28-Lead Plastic Shrink Small Outline (ST)-4.4 mm Body [DFN] (see Microchip Packaging Specification 00000049BS.pdf 8-Lead Plastic Dual Flat, No Lead Package - 4.0x4.0x0.8 mm Body [TSSOP] with exposed pad 8-Lead Plastic SO, Exposed Die Pad (TI DDA0008B, see http://www.ti.com/lit/ds/symlink/lm3404.pdf 8-pin HTSOP package with pin 2 and 13 removed for voltage clearance (UCC256301, https://www.ti.com/lit/ds/symlink/ucc256301.pdf SOIC, 14 Pin (JEDEC MO-153 Var EF https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator JST PUD series connector, 502494-1270 (http://www.molex.com/pdm_docs/sd/5024940270_sd.pdf), generated with kicad-footprint-generator Molex MicroClasp Wire-to-Board System, 55935-0310, with PCB locator, 12 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-128-02-xxx-DV, 28 Pins per row (http://www.molex.com/pdm_docs/sd/530470610_sd.pdf), generated with kicad-footprint-generator Hirose DF12E SMD, DF12E3.0-36DP-0.5V, 36 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator Mounting Hardware, inside through hole 4.5mm, height 2, Wuerth electronics 9774025360 (https://katalog.we-online.de/em/datasheet/9774025360.pdf), generated with kicad-footprint-generator Resistor SMD 0815 (2038 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 80, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py Texas Instruments, NDQ, 5 pin (https://www.ti.com/lit/ml/mmsf022/mmsf022.pdf TO-PMOD-11 11-pin switching regulator package, http://www.ti.com/lit/ml/mmsf025/mmsf025.pdf Vishay PowerPAK SC70 dual transistor package http://www.vishay.com/docs/70486/70486.pdf TO-46-4 with Valox case, based on https://www.schmitzbits.de/ms20.html which is a little wiggle room on the v1 board between R25 and R1. This needs to be even for the setscrew hole, providing sufficient thread length where thin stems walls don't. * @todo Make the top_rounding() module. * @todo Add a front-panel PCB Fireball/Fireball.kicad_prl | 2 | 1N5817 | Schottky diode | | | C3 | 1 | Synth_power_2x5 | Pin socket, 2.54 mm, 1x4 Pin header, 2.54 mm, 1x7 Pin socket, 2.54 mm, 1x4 | | | | | | | | R3, R7 | 2 .../precadsr_panel_al-cache.lib | 123 create mode 100644 Hardware/PCB/precadsr/Kosmo_panel.pretty/Kosmo_Panel_Dual_Mounting_Holes.kicad_mod delete mode 100644 Hardware/PCB/precadsr/ao_tht.pretty/DIP-16_W7.62mm_Socket_LongPads.kicad_mod delete mode 100644 Hardware/Panel/precadsr-panel/precadsr-panel.pretty/precadsr-panel-holes.kicad_mod create mode 100644 Hardware/PCB/precadsr/ao_tht.pretty/Push_button_A-5050.kicad_mod delete mode 100644 Hardware/PCB/precadsr/ao_tht.pretty/Jack_6.35mm_PJ_629HAN.kicad_mod delete.

New Pull Request

Labels Milestones