Labels Milestones
Back(rv15 // glide in (sleeve and normal both GND - Gate out (could normal to Reset In Pause CV In - U1-13 (can get at from top when assembled Stop Switch - 10 - center_adjust; center_col = width_mm/2; //mm third_col = 60.7-center_adjust; //mm cv_in = [input_column, bottom_row, 0]; cv_in = [input_column, bottom_row, 0]; pwm_pot = [input_column - h_margin/2, row_1, 0]; saw_out = [h_margin + working_width/4, row_1, 0]; pwm_in = [width_mm - h_margin - working_width/8, row_4, 0]; pwm_cv_lvl = [second_col, third_row, 0]; fm_lvl = [h_margin+working_width/8, row_4, 0]; left_rib_x = thickness * 1; right_rib_x = width_mm - hole_dist_side, height - rail_clearance - thickness*2 - 16.5/2; // 16.5 is the two clockwise-most pins, looking from below. Clock rate (B100k) (not sure yet which 2 pins LED, diameter 5.0mm z-position of LED center 1.0mm, 2 pins, pitch 7.5mm, size 9.8x14mm^2, drill diamater 1.2mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon THT Terminal Block Phoenix MKDS-3-7-5.08, 7 pins, pitch 5mm, size 20x9mm^2, drill diamater 1.2mm, pad diameter 2.6mm, see http://www.4uconnector.com/online/object/4udrawing/10701.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 236-505 45Degree pitch 5mm size 32.3x14mm^2 drill 1.15mm pad 3mm Terminal Block WAGO 236-209 45Degree pitch 5mm size 25x12.5mm^2 drill 1.4mm pad 2.7mm terminal block RND 205-00296 pitch 5.08mm size 61x10.6mm^2 drill 1.3mm.
- (see bellow) "); echo(" values.
- Itrip=5.1A, http://www.bourns.com/docs/Product-Datasheets/mfrg.pdf ptc resettable fuse polyfuse THT PTC.
- Vertex 3.99693 -8.86128 3.26879 vertex -9.21464 2.08528.