synth_tools

Back

1990834 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1990834), generated with kicad-footprint-generator Molex SPOX Connector System, 5268-15A, 15 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator Mounting Hardware, inside through hole 3.3mm, height 2, Wuerth electronics 9774070943 (https://katalog.we-online.de/em/datasheet/9774070943.pdf), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-133-02-xxx-DV-BE, 33 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py QFN, 24 Pin (http://www.ti.com/lit/ds/symlink/bq25601.pdf#page=54), generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 2 times 1 mm² wire, reinforced insulation, conductor diameter 1.25mm, outer diameter 2.1mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00045_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix MKDS-1,5-15-5.08, 15 pins, pitch 7.5mm, size 52.5x10.3mm^2, drill diamater 1.15mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00298_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00002 pitch 5mm size 61.5x15mm^2 drill 1.2mm pad 2.4mm Terminal Block Phoenix MKDS-1,5-12-5.08 pitch 5.08mm 0.5W = 1/2W length 9mm width 3.6mm Capacitor C, Rect series, Radial, pin pitch=10.00mm, , length*width=11.5*3.6mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf C Rect series Radial pin pitch 20mm length 17mm diameter 7.0mm C, Axial series, Axial, Vertical, pin pitch=2.54mm, , length*diameter=7*3.3mm^2, Fastron, MICC, http://www.fastrongroup.com/image-show/70/MICC.pdf?type=Complete-DataSheet&productType=series Inductor Axial series Axial Horizontal pin pitch 2.54mm size 18.2x6.2mm^2 drill 1.1mm pad 2.1mm terminal block RND 205-00307 pitch 10mm size 35x9mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00047 pitch 5mm Varistor, diameter 15.5mm, width 4.6mm, pitch 7.5mm size 17.3x14mm^2 drill 1.15mm pad 3mm Terminal Block WAGO 236-416, 45Degree (cable under.

New Pull Request

Labels Milestones